Intro: Induction-Heat-Treatment-ServicesShot blasting is creating depressions on the surface of a metal by regularly pelting it with shots of sand or steel balls of a certain diameter. The process is accomplished by employing something like an air gun. A shot bl

Intro: Brazing process exudes fumes, emissions and radiations that may be harmful for the people involved in conducting and managing. The people working in this industry are exposed to gases and harmful radiations that are exuded by the brazing of the base metal

Intro: Objective :To heat various sizes of aluminum auto trim to 500F (260C) at a rate of 30 ft. (9.1m) per minute for curing an adhesive.Material: Magnetic steel and aluminum auto trim parts, coated with adhesive; 1.85” (47mm) ID ceramic tubeTemperature :500 F

Intro: Objective : Brazing a cone shaped carbide to a stainless steel shaft for a diggerMaterial : Cone shaped carbide 1.12” (28.4mm) dia, 1.5”(38.1mm) tall,stainless steel shaft 1.12” (28.4mm) dia and various length, black brazing flux and braze shimsTemperat…

Intro: What is brazing?The term “brazing” can be applied to any process which joins metals (of the same or dissimilar composition)through the use of heat and a filler metal with a melting temperature above 840 F (450 C), but below the melting point of the meta…

Intro: Surface hardening of carbon steel by high frequency induction heating (HFIH) produces a considerable increase in its resistance to stress corrosion [1, 2]. The magnitude of this increase depends on the depth of surface hardening, on the strength of the sp

Intro: The induction heating of round bars and round-corner-square (RCS) billets are often treated as equivalent applications, even though they are not. This article reconciles recent theoretical and practical achievements in providing required heat uniformity w

Intro: In recent years this plant is using hardening with preceding induction heating for morethan 50% of the total amount of heat-treated parts. These are mainly tractor parts made from45, 40Kh, 38KhGS, and 33KhS steels. The overwhelming majority of parts (85%

Intro: Forgings are subjected to final heat treatment or intermediate heat treatment to improve the maohinabitity.The processes that occur during heat treatment of forgings can be divided into two groups — processesoccurring at temperatures above and below Ac 3.

Intro: The purpose of this Tech Note is to demonstrate the advantages of Induction Heating technology like new Nova Star technology for precision induction heating applications. In each section, we will show how a particular aspect of this new technology makes a