Induction Heating Aluminum Auto Trim

Summary
Objective :To heat various sizes of aluminum auto trim to 500F (260C) at a rate of 30 ft. (9.1m) per minute for curing an adhesive.Material: Magnetic steel and aluminum auto trim parts, coated with adhesive; 1.85” (47mm) ID ceramic tubeTemperature :500 F

Induction Heating Aluminum Auto Trim
Objective
:To heat various sizes of aluminum auto trim to 500°F (260°C) at a rate of 30 ft. (9.1m) per minute for curing an adhesive.
Material: Magnetic steel and aluminum auto trim parts, coated with adhesive; 1.85” (47mm) ID ceramic tube
Temperature :500 °F (260°C)
Frequency :152 kHz
Equipment
• HF 25kW induction heating system equipped with a remote workhead with six 0.75μF capacitors for a total capacitance of 0.5 μF
• An induction heating coil designed and developed
specifically for this application.
Process :To simulate continuous production, a slide table/stepping motor arrangement and ceramic tube are used to move the parts through the eight turn helical coil at 30 ft. (9.1m) per minute. In continuous production, an infrared sensor can be used to measure the temperature of the aluminum after exiting the coil and adjust output of the power supply to maintain the required 500 °F (260°C).
Results/Benefits:
• Consistent, controllable heat
• Hands free operation
• Reliable, repeatable results

Tags
induction heating, induction heater, induction heating machine, Melting gold, gold melting, induction melting gold, induction gold melting furnace, induction heating equipment, high frequency heating

Newest Comment

    No Comment

Post Comment

Verify Code:
United Induction Heating Machine Limited
© Copyright 2021. uihm.com All Rights Reserved.