Objective: Crucible melting of Titanium and Nobelium ingots within a period of 45 seconds.Four ingots of Nobelium are to be placed in a crucible (ID#6012) and heated, while a single ingot of Titanium is placed in a crucible (ID#65045) for heating.
Material: 1/2" x 3/8" x 3/8" Ingots of Nobelium
1/2" OD x 3/4" long Ingots of Titanium
Temperature:
26500F (Nobelium)
26500F (Nobelium)
24500F (Titanium)
Application: Due to the small size of the ingots, MF induction heating was required to efficiently couple to the samples in order to provide the necessary power to initiate melting. By using the DW-MF-70 kW output solid state induction power supply and a five (5) turn helical coil, the following results were achieved:
35 seconds was required to fully melt the Nobelium Ingots.
30 seconds of heating time was required to melt the Titanium Ingot.
Equipment: 80kW output solid state induction power supply including four (4) capacitors totaling 1.33 μF, and a five (5) turn helical coil made from 3/16" tubing and measuring 1 5/8" ID and 1 1/2" high.
Frequency: 20KHz
Newest Comment
No Comment
Post Comment