Objective To heat titanium rod blanks prior to forging into a turbine blade.Material Titanium rod blanks 0.591″(15.01mm) OD by 11.8″(299.7mm) longTemperature 2030F(1110C)Frequency 64 kHzEquipment • UM-HF-45kW induction heating system equipped with a rem…

2007/04/03

Objective To heat-cure a NextelTM Ceramic fiberMaterial Ceramic fiber 30,000 (9,145) ft(m) Steel tubeTemperature indicating paintTemperature 1300(700) F(C)Frequency 70 kHzEquipment UM-HF-45kW, 50-450 kHz solid-state induction power supply with a remote he

2007/04/03

Objective To heat measuring tape stock at a maximum rate of 600 feet per minute to cure the applied paint. The heating coil is to accommodate the 3/8″ wide stock within the customer’s current framework. Curing must occur above 400F at the rate specified.…

2007/04/03

Objective To heat an aluminum molding shape in order to activate an adhesive coating prior to applying the vinylMaterial Aluminum molding folded from a flat sheet measuring 2″ wide and 0.03″ thick. The final form measures 5/8″ by 1″Temperature 500FFreq…

2007/04/03

Air Cooled clamp coil (half-open coil) for preheating gas pipeline by air cooled induction heater UM-DSP80AB-HF

2014/01/01

induction coating by air cooled clamp induction coil

2014/01/01

induction vacuum coating with multi UM-DSP induction heater

2014/01/01