Research the heating effects Objective Heating stainless steel disc & tantalum disc to 1400F (760C)Material Stainless steel and tantalum discs approx 1/2” (12.7mm) diameter. End product is radioactivity counting plateTemperature 1400 F (760C)Freq…

2008/08/03

Heating motor Objective Heat steel to help bond an injection molded piece and help the reflow.Material Steel motor body, 60 x 60 x 27 (2.4 x 2.4 x 1.1) mm(in)Temperature 260C (500F)Frequency 237 kHzEquipment • Power of 20kW induction heating system, …

2008/08/03

Heat braided cable Objective Prior to cutting, heat a short section of a hardened steel cable coated with a polyethylene sheathing.Material Multi-strand braided stainless steel cable 0.5 in. (1.27 cm) OD enclosed within a polyethylene sheathingTempera…

2008/08/03

Heat the end of catalytic converter Objective Heat the end of lorry catalytic converter exhaust system. The assembly must be held at target temperature for 200 hours, whilst the assembly is vibrated to test the weld strength.Material SteelTemperature …

2008/08/03

Heat the plough discs Objective To heat the circumference of plough discs before hot rolling (sharpening) processMaterial Flat Boron steel discs, OD 460 to 710 mm (18 to 28”) thickness 3.2 to 10 mm (8/64 to 25/64”)Temperature 725C 1335FFrequency 75 …

2008/08/03

Heat seat springs for powder coat Objective Heat the steel spring assemblies of automotive seats to powder coatMaterial Steel wire springs ~24” (61 cm) long, 1/8 “ (3.175mm) diameter cross sectionTemperature 500 F (250 C)Frequency 57 kHzEquipment P…

2008/08/03

Heat aluminum molds Objective Heat aluminum cake molds to release baked food productsMaterial Aluminum molds 4.5” (11.4 cm) diameterTemperature 302 F (150 C)Frequency 65 kHzEquipment Power of 70kW, induction heating system, equipped with a remote h…

2008/08/03

Heat pliers Objective Heat pliers for final shaping of the handlesMaterial Steel pliers handles 5” (12.7 cm) long; 0.14” (3.56mm) thickTemperature 1200F (649 C)Frequency 199 kHzEquipment Power of 6kW induction heating system, equipped with a remote …

2008/08/03

Heat steel plates Objective Heat steel plates on conveyor system in order to cook Welsh cakes.Material Steel plate 760 x 440 x 10mm (29.9 x 17.3 x 0.4 in.)Temperature 200 C (392 F)Frequency 87 kHzEquipment Power of 100kW induction heating system, equi…

2008/08/03

Heating engine headObjective Heat steel liners on the head of an engine to remove aluminium casing.Material Steel, 80 mm ID x 190 mm (3.1 in x 7.5 in.)Temperature 650 C (1202 F)Frequency 81 kHzEquipment Power of 35kW induction heating system, equipped…

2008/08/03