-
Keywords"steel tube"ļ¼total 13 records
-
induction annealing ss steel tube
induction annealing SS steel tube
Dateļ¼2017/11/11
-
induction jointing seamless steel tube by 500khz uhf induction heater
induction jointing seamless steel tube by 500KHz UHF induction heater (1)induction jointing seamless steel tube by 500KhZ UHF induction heater (2)
Dateļ¼2016/11/11
-
induction preheating for seamless steel tube before jointing by 40kw induction heater um-40ab-mf
induction preheating for seamless steel tube before jointing by 40KW induction heater UM-40AB-MF
Dateļ¼2014/03/09
-
remove plastic coating from steel tubes by induction heating
Objective Recover the polypropylene insulation from hollow steel tubes to allow recycling of both the tubes and the insulation. Material Hollow steel tubes 1/8ā (0.318 cm) to 5/8ā (1.59 cm) IDProtective polypropylene coating Temperature 150 C (302Fā¦
Dateļ¼2014/05/22
-
induction bending steel tube for nuclear electric plant
induction bending steel tube for nuclear electric plant
Dateļ¼2003/08/11
-
induction annealing an oval cut out on a stainless steel tube
Objective To anneal a area around an oval cutout on a stainless steel tube prior to extrusionMaterial:.75" (19mm), 1.5" (38.1mm) and 4" (101.6mm) diameter steel tubesTemperature: 1900 F ( 1038 C)Frequency: 50KHzEquipment:ā¢ UM-60AB-HF inductā¦
Dateļ¼2013/05/06
-
high frequency induction heating equipment annealed stainless steel tube
UM-60AB-HF high frequency induction heating equipment for stainless steel pipe annealing (solution), annealed steel pipe weld can withstand the stress of bending, flattening, the weld will not crack, fast heating and high efficiency
Dateļ¼2013/04/18
-
induction soldering steel tube
Soldering Steel Tube Objective Heat a.125ā (3.175mm) diameter stainless steel tube to a 1ā diameter cylinder 1ā (25.4mm) tall for a soldering applicationMaterial Stainless steel cylinder and tubeTemperature indicating paint Lead free solder preform ringā¦
Dateļ¼2008/02/03
-
induction shrink fit steel tube
Shrink Fit Steel Tube Objective Heating a steel tube to 500-1000F for a shrink-fitting application. Determine expansion (growth) of ID at varying temperatures.Material Steel tubes 7ā OD x 4.75ā ID x 5ā heat zone Type āKā thermocouple to measure temperā¦
Dateļ¼2008/02/03
-
induction brazing steel tube
Objective To braze a steel tube to a steel āTā fitting Material 1ā (25.4mm) diameter steel tubing, steel fitting, braze slug and black flux Temperature 1400F (760C) Frequency 198 kHz Equipment ā¢ Power of 15kW induction heating system, equipped withā¦
Dateļ¼2007/04/03
© Copyright 2021. uihm.com All Rights Reserved.