-
Keywords"soldering"ļ¼total 142 records
-
induction soldering ferrule to fiber optic cable
Soldering Ferrule to Fiber Optic Cable Objective To heat a gold-plated ferrule and fiber optic cable to 475F within 8 seconds for a soldering applicationMaterial Gold-plated ferrule tube, fiber optic cable, solder preformTemperature 475 FFrequency 270 kHzEā¦
Dateļ¼2008/02/03
-
induction soldering fiber optic
Soldering Fiber Optic Objective To heat a fiber optic housing to 400F within 10 seconds for avsoldering application, to form a hermetic sealMaterial Gold-plated aluminum housing, solder preform ring and fluxTemperature 400 FFrequency 267 kHzEquipment Powerā¦
Dateļ¼2008/02/03
-
induction soldering solar panel
soldering solar panel Objective Heat multiple joints on solar flex circuit strips to 500F (260C) within ten seconds for a soldering application.Material Flexible solar panel, Solder Plus Paste 63NC-A, 0.0625ā (1.59mm) thick Teflon sheetsTemperature 500 F(ā¦
Dateļ¼2008/02/03
-
induction soldering brass rings
Soldering brass rings Objective: To heat 1 3/4, 3 and 6 diameter brass slip rings and a sheathed copper wire assembly to 3600 F for soldering within three (3) to six (6) seconds. Currently production is accomplished by using a soldering iron and stick feedā¦
Dateļ¼2008/02/03
-
induction soldering brass bellows assembly
Soldering Brass Bellows Assembly Objective: To heat a brass bellows and end cap assembly to 450F for soldering within 20 seconds. Presently, a soldering iron is used to produce the joint between the bellows and cap. The customer requests a quality solder jā¦
Dateļ¼2008/02/03
-
induction soldering brass tubes
Soldering brass tubes Objective: Soldering two brass tubes measuring 3/4 and 1/4 together for use as cellular phone antennas. The lengths of tubes range from four (4) feet to twelve (12) feet, and must be soldered along the axial side. The joint is to be mā¦
Dateļ¼2008/02/03
-
induction soldering steel
Soldering Steel Objective To heat a special steel housing to 500(260) F(C) for a soldering applicationMaterial Steel housingSolder wire and fluxTemperature 500(260) 550(287.8) F(C)Frequency 200 kHzEquipment Power of 6kW, 150-400 kHz solid state induction ā¦
Dateļ¼2008/02/03
-
induction soldering steel tube
Soldering Steel Tube Objective Heat a.125ā (3.175mm) diameter stainless steel tube to a 1ā diameter cylinder 1ā (25.4mm) tall for a soldering applicationMaterial Stainless steel cylinder and tubeTemperature indicating paint Lead free solder preform ringā¦
Dateļ¼2008/02/03
-
induction soldering copper
Soldering copper Objective Heat copper tab until the solder reflows. Material Copper tab 0.25 X 0.25 inch square about 0.05 inches thick. Lead free solder material (higher melting temperature than regular solder.) Temperature 500 F for 1.25 seconds ā¦
Dateļ¼2008/02/03
-
induction soldering steel connectors
Soldering Steel Connectors Objective Heat an assembly of small, gold-plated steel connectors to a brass block. Material Approx. 1/8ā (3.2mm) diameter gold-plated steel connectors, 1ā(25.4mm) square x 1/4ā thick brass block Temperature 600F(315.6C)ā¦
Dateļ¼2008/02/03
© Copyright 2021. uihm.com All Rights Reserved.