-
Keywords"on"ļ¼total 2924 records
-
induction brazing brass fitting to copper air lines
Objective To braze brass end-connectors to copper tubes used in aircraft assembly air linesMaterial brass end connectors, copper tubes of different diametersTemperature 1400 F 750CFrequency 350 kHzEquipment Power of 6KW induction heating system, including ā¦
Dateļ¼2005/10/02
-
induction brazing water faucets
Objective Brazing several brass and copper assemblies used in water faucetsMaterial braze, white fluxTemperature 1350 F 730CFrequency 160 or 277 kHz (coil dependant)Equipment Power of 15kW induction heating system, remote work head with two 1Ī¼F capacitorsā¦
Dateļ¼2005/10/02
-
induction braze copper tube to brass fitting
Objective To use induction heating to braze a copper tube to a brass fitting using a preform braze wire. Processing is to occur under an atmosphere of Nitrogen and 4% Hydrogen gas. The braze preforms melt at 1190F, but the parts need to be kept below 1300Fā¦
Dateļ¼2005/10/02
-
induction brazing eyeglass frame assembly
Objective Produce repeatable braze joints for the assembly of eyeglass frames. Induction heating is to be used to achieve quality braze joints on the nose bridge, brow bridge and nose piece. Brazing is to be done at 1300F with approximately 3-5 seconds alā¦
Dateļ¼2005/10/02
-
induction brazing copper tube
Objective To braze a copper tube ( 3/8ā³ OD by 2-4ā³ long) into a 3/8ā³ fitting in less than 10 seconds. Heating must take place in a channel type coil to allow for easy loading of parts. Material Copper Tubing and Fitting with Braze and Stay Silv Whiteā¦
Dateļ¼2005/10/02
-
induction brazing carbide tips on drill bits
Objective To braze carbide cutting tips to drill bits ranging in size from 0.5ā³ to 1.5ā³ in diameter. The brazing takes place at 1900F and is presently done in 11 seconds for the 0.5ā³ diameter bit and 39 seconds for the 1.5ā³ diameter bit. Customer goalsā¦
Dateļ¼2005/10/02
-
induction brazing steel tube with copper ring
Objective To heat an oil suction assembly (steel tubing and filter cap) to 1,850F (1010C) within 15 seconds for a brazing application. Material 0.125ā (3.2mm) diameter steel tube and filter cap assembly, high temperature brazing flux, copper ring. Tempeā¦
Dateļ¼2005/10/02
-
induction brazing turbine blades
Objective To heat an inconel turbine blade in a vacuum to 2000F and hold temperature for five minutes for a nickel brazing application. Material Inconel turbine blades, nickel metering plates, nickel braze Temperature 2050F Frequency 20 kHz Equipment Aā¦
Dateļ¼2005/10/02
-
induction brazing steel fitting
Objective To heat a steel hydraulic hose fitting in an inert atmosphere to 2200F within 7 seconds for brazing without any carbon buildup. Material Three-opening steel hydraulic fitting, pure copper braze paste Temperature 2200F Frequency 273 kHz Equipmā¦
Dateļ¼2005/10/02
-
induction brazing steel conduit
Objective To heat a stainless steel conduit, ferrule and elbow assembly to 1400F (760C) within 20 seconds for brazing. Material 6ā(152.4mm)long x 0.5ā(12.7mm) diameter stainless steel conduit, 0.5ā(12.7mm) long x 0.5ā(12.7mm) diameter ferrule, 2ā(50.ā¦
Dateļ¼2005/10/02
© Copyright 2021. uihm.com All Rights Reserved.