-
Keywords"n"，total 3019 records
-
induction brazing copper joints
Objective Brazing a joint between a copper lug and nickel plated copper pins on a pressurized heater connector. Material 1.5” (38.1mm) dia heater connector in a ceramic insulator with L shaped copper lugs and nickel plated copper pins, silver solder and …
Date：2007/04/03
-
induction brazing stainless steel joint
Objective Braze an end plug on a stainless steel joint of the car grill before powder coating application Material Stainless steel car grill 0.5” x 0.19” (12.7mm x 4.8mm), end plugs and braze ring Temperature 1350 F (732C) Frequency 267 kHz Equipment…
Date：2007/04/03
-
induction brazing stainless steel hose to copper elbow
Objective Braze a stainless steel braided hose to copper elbows for a braided hose assembly. Material Stainless steel braided hose 3/8” (9.5mm) OD, copper elbow 1/4” (6.3mm) OD, braze preform rings and black flux Temperature 1400 F (760 C) Frequency 2…
Date：2007/04/03
-
induction brazing copper contacts
Objective Heat silver contacts and brass/copper bus for brazing application Material Silver contact .75 (19mm) diameter, brass and copper bus 2” x 1” (50.8 x 25.4mm), braze shims, white flux Temperature 1300 F (704 C) Frequency 320 kHz Equipment • P…
Date：2005/10/03
-
induction brazing carbide tip
Objective Braze a carbide tip to a 4140 steel cutting tool Material Carbide Isograde C2 & C5 tips, 4140 circular steel cutter, flux and silver braze shim Temperature 1400 F (760 C) Frequency 290 kHz Equipment • Power of 20kW induction heating syst…
Date：2005/10/02
-
induction brazing two positions on a stainless steel manifold
Objective Simultaneously braze two positions on a stainless steel manifold Material Stainless steel manifold 4” (101.6mm) long, 1” (25.4mm) in diameter and nico braze Temperature 1800 F (982 C) Frequency 198 kHz Equipment • Power of 20kW induction h…
Date：2005/10/02
-
induction brazing brass trap block
Objective Block is heated to 1400F to braze trap tube to assemblyMaterial brass block and pre-formed tubesbraze pre-formsTemperature 1400 F (760C)Frequency 357 kHzEquipment Power of 20kW induction heating system including• Coil: custom-designed 2-turn spl…
Date：2005/10/02
-
induction brazing plumbing
Objective A copper-brass fluids union is brazed under constrained conditions (onboard a submarine), where access is limited and flame is not allowed. Material copper and brass plumbing components Temperature 750C (1380 F) Frequency 245 kHz Equipment Po…
Date：2005/10/02
-
induction brazing carbide
Objective Braze a carbide wear pad to steel for automated surgical forceps Material Steel assembly 1/2” (127 mm) long, 1/8 “ (3.175 mm)cross section Carbide wear pad Braze alloy Temperature 1350-1400 F (732- 760 C) Frequency 313 kHz Equipment Po…
Date：2005/10/02
-
induction brazing steel-carbide tool
Objective Provide a solution to this steel-carbide brazing applicationMaterial • Body 10mm; carbide tip 57 x 35 x 3 mm• Braze shim• Braze flux whiteTemperature 750C (1382F)Frequency 152 kHzEquipment Power of 10kW induction heating system, equipped with …
Date：2005/10/02
© Copyright 2024. uihm.com All Rights Reserved.
