-
Keywords"per"ļ¼total 296 records
-
induction soldering brass and copper
Soldering brass and copper Objective To heat brass and copper for soldering application on medical equipmentMaterial Brass ring, brass and copper pieces 5.11ā (130mm) long, 4.3ā (110mm) OD & 0.3ā (7mm) at thickest point and solder ringsTemperature 3ā¦
Dateļ¼2008/02/03
-
induction soldering copper
Soldering copper Objective Heat copper tab until the solder reflows. Material Copper tab 0.25 X 0.25 inch square about 0.05 inches thick. Lead free solder material (higher melting temperature than regular solder.) Temperature 500 F for 1.25 seconds ā¦
Dateļ¼2008/02/03
-
induction hardening and tempering of tools
WHAT ARE THE STEELS?Tool and die steels are covered in BS 4659:1989, although both American nomenclature and a variety oftrade names are also in use. Available in high-quality grades, these specifically-designed steels can be groupedbroadly according to tā¦
Dateļ¼2007/04/03
-
induction brazing copper pivot
Objective Brazing a copper pivot assembly Material Two copper uprights 2ā (5cm) wide x 4ā (10.2cm) high, copper base 3ā (7.6cm) x 2ā (5cm) and .5ā (1.3mm) thick with 2 channels for the uprights to the slide into, braze shims and black flux Temperatuā¦
Dateļ¼2007/04/03
-
induction brazing copper joints
Objective Brazing a joint between a copper lug and nickel plated copper pins on a pressurized heater connector. Material 1.5ā (38.1mm) dia heater connector in a ceramic insulator with L shaped copper lugs and nickel plated copper pins, silver solder and ā¦
Dateļ¼2007/04/03
-
induction brazing stainless steel hose to copper elbow
Objective Braze a stainless steel braided hose to copper elbows for a braided hose assembly. Material Stainless steel braided hose 3/8ā (9.5mm) OD, copper elbow 1/4ā (6.3mm) OD, braze preform rings and black flux Temperature 1400 F (760 C) Frequency 2ā¦
Dateļ¼2007/04/03
-
induction brazing copper contacts
Objective Heat silver contacts and brass/copper bus for brazing application Material Silver contact .75 (19mm) diameter, brass and copper bus 2ā x 1ā (50.8 x 25.4mm), braze shims, white flux Temperature 1300 F (704 C) Frequency 320 kHz Equipment ā¢ Pā¦
Dateļ¼2005/10/03
-
induction brazing copper to copper
Objective To braze copper to copper bus bar assemblies together Material ā¢ 2 copper bus bars 6ā (152.4mm) wide, 2ā (609.6mm)long, 2 copper bars 6ā(152.4mm) wide, 18ā (457.2)long & 3/8ā (9.65mm) thick ā¢ braze shim preforms and white flux Tempeā¦
Dateļ¼2005/10/02
-
induction brazing copper tube & pipe
Objective Braze brass fitting with o-ring to various diameters of copper tube. Material Various copper tubes ranging from 3/8ā to 7/8ā diameter and 2-3ā long, female brass fittings with o-ring, silver solder rings and glass beaker. Temperature 1300 F ā¦
Dateļ¼2005/10/02
-
induction brazing copper fittings
Objective Copper āteesā and āellsā are to be brazed to the aluminum body of a refrigeration valveMaterial customerās valvecopper fittingsbrazeTemperature 2550 F (1400C)Frequency 285 kHzEquipment Power of 15KW induction heating system including a workhā¦
Dateļ¼2005/10/02
© Copyright 2021. uihm.com All Rights Reserved.