-
Keywords"Marble Blade"ļ¼total 35 records
-
induction hardening bed knife blade
Objective Harden a selected area on an 18ā³(457.2mm) bed knife blade for a reel type lawn mower. The hardness desired is between 45 to 55 Rockwell C, and should be measured 0.062ā³(1.6mm) from the cutting edge. Material 1070 Steel Bed Knife Blade measurinā¦
Dateļ¼2007/04/03
-
induction hardening surgical knife blades
Objective Harden a 4ā³(101.6mm) section of a Stainless Steel surgical blade measuring 7ā³ (177.8mm) long. Hardness should be 48 to 53 Rockwell C on the blade after processing. Material 420 Stainless Steel Surgical Blades measuring 7ā³(177.8mm) long, 1/4ā³ā¦
Dateļ¼2007/04/03
-
induction brazing turbine blades
Objective To heat an inconel turbine blade in a vacuum to 2000F and hold temperature for five minutes for a nickel brazing application. Material Inconel turbine blades, nickel metering plates, nickel braze Temperature 2050F Frequency 20 kHz Equipment Aā¦
Dateļ¼2005/10/02
-
induction annealing saw blades
Objective Anneal saw blades used for cutting bread, prior to hole punching.Material .38ā (9.6mm) wide and .51ā (12.9mm) wide continuous strips of 400 series stainless steel.Temperature 600C (315.6F) for one secondFrequency 229kHzEquipment ā¢ UIHM 6 kW iā¦
Dateļ¼2006/10/02
-
induction brazing turbine blades
Process The UIHM ABS Mark 2 with a vacuum level of <510-4 torr was used for the testing. A specially designed induction coil was used to provide optimal heating (approximately 80% energy efficiency) to the braze joint area. The temperature of the joint ā¦
Dateļ¼2013/04/08
© Copyright 2021. uihm.com All Rights Reserved.