-
Keywords"car"ļ¼total 42 records
-
induction brazing carbide to steel shaft
Objective Brazing a cone shaped carbide to a stainless steel shaft for a digger Material Cone shaped carbide 1.12ā (28.4mm) dia, 1.5ā(38.1mm) tall, stainless steel shaft 1.12ā (28.4mm) dia and various length, black brazing flux and braze shims Temperaā¦
Dateļ¼2007/04/03
-
induction brazing carbide tip
Objective Braze a carbide tip to a 4140 steel cutting tool Material Carbide Isograde C2 & C5 tips, 4140 circular steel cutter, flux and silver braze shim Temperature 1400 F (760 C) Frequency 290 kHz Equipment ā¢ Power of 20kW induction heating systā¦
Dateļ¼2005/10/02
-
induction brazing carbide
Objective Braze a carbide wear pad to steel for automated surgical forceps Material Steel assembly 1/2ā (127 mm) long, 1/8 ā (3.175 mm)cross section Carbide wear pad Braze alloy Temperature 1350-1400 F (732- 760 C) Frequency 313 kHz Equipment Poā¦
Dateļ¼2005/10/02
-
induction brazing steel-carbide tool
Objective Provide a solution to this steel-carbide brazing applicationMaterial ā¢ Body 10mm; carbide tip 57 x 35 x 3 mmā¢ Braze shimā¢ Braze flux whiteTemperature 750C (1382F)Frequency 152 kHzEquipment Power of 10kW induction heating system, equipped with ā¦
Dateļ¼2005/10/02
-
induction brazing carbide to steel
Objective Braze a carbide sleeve to a steel āTā shank Material 2.0ā (51mm) OD carbide sleeve, 1.0ā (25.5mm) high braze joint, 1.5 ā (38 mm) steel āTā , 50% silver braze ring Temperature 1292 F (700 C) Frequency 257 kHz Equipment ā¢ Power of 10 kā¦
Dateļ¼2005/10/02
-
induction brazing carbide teeth to steel pipe
Objective Brazing carbide teeth to a steel jaw in less than 5 minutes Material Steel pipe jaw, 0.5ā (12.7mm) dia, 1.25ā (31.75mm) long, 0.25ā (6.35mm) thick carbide teeth, black flux and silver copper braze shims Temperature 1292F (700C) Frequency 25ā¦
Dateļ¼2005/10/02
-
induction brazing carbide shaft to steel tube
Objective Braze a carbide shaft to a steel tube Material Carbide shaft 1/8ā to 1ā diameter (varying sizes) Steel tube 3/8ā to 1 ā OD Silver solder braze Temperature indicating paint Temperature 1400 F for 60 seconds Frequency 220 kHz Equipment Powā¦
Dateļ¼2005/10/02
-
induction brazing carbide tool
Objective Braze carbide rotary file assemblies with uniform concentricity in an aerospace application Material ā¢ Carbide blank ā¢ High speed steel shank ā¢ Temperature indicating paint ā¢ Braze shim and black flux Temperature 1400F (760C) Frequency ā¦
Dateļ¼2005/10/02
-
induction brazing carbide tips
Objective Attaching carbide cutters to a steel meat cutter impeller Material carbide blocks; steel shank fitting Temperature 1400 F (760 C) Frequency 219 kHz Equipment Power of 30kW induction heating systems including: Induction heating coil ā¦
Dateļ¼2005/10/02
-
induction brazing carbide tips on drill bits
Objective To braze carbide cutting tips to drill bits ranging in size from 0.5ā³ to 1.5ā³ in diameter. The brazing takes place at 1900F and is presently done in 11 seconds for the 0.5ā³ diameter bit and 39 seconds for the 1.5ā³ diameter bit. Customer goalsā¦
Dateļ¼2005/10/02
© Copyright 2021. uihm.com All Rights Reserved.