-
Keywords"Brass"ļ¼total 110 records
-
induction Brass soldering for pot bottom
Induction heating is widely used for brass soldering, its better than common heating ways like gas welding.induction brazing copper scewinduction brass brazing nutinduction brass brazinginduction brass soldering
Dateļ¼2013/04/10
-
induction soldering ceramic feed thru to Brass housing
Induction brazing and soldering are processes that take advantage of induction heatings ability to deliver rapid localized heating to a particular region of a part.induction Soldering Ceramic Feed Thru to Brass Housing
Dateļ¼2003/04/01
-
induction brazing Brass manifold
Induction brazing and soldering are processes that take advantage of induction heatings ability to deliver rapid localized heating to a particular region of a part.induction Brazing Brass Manifold
Dateļ¼2003/04/01
-
induction brazing Brass fitting to copper
Induction brazing and soldering are processes that take advantage of induction heatings ability to deliver rapid localized heating to a particular region of a part.induction Brazing Brass Fitting to Copper
Dateļ¼2003/04/01
-
quick induction brazing Brass
Induction Brazing is joining of similar or dissimilar metal (parent materials) by using heat and braze material (filler material) whose melting temperture is normally above 500 C and below the melting temperature of parent materials being joined.Induction ā¦
Dateļ¼2013/03/30
-
induction heating furnace for Brass gold silver
UIHM Medium Frequency Induction Heating Machines can be used for forging different kinds of metal material.Melting Capacity: 50G to 2000KG (by IGBT or SCR-Silicon Controlled Rectifier).Furnace: directly or tilting type.Induction Heating Furnace for Brass Gā¦
Dateļ¼2013/03/30
-
induction Brass soldering for copper workpiece
Induction Brass Soldering for copper workpiece
Dateļ¼2010/04/30
-
induction heating Brass mandrel die
Heating brass mandrel die Objective Water-cooled brass mandrel die, nylon LDPE catheter, āKā type thermocouple and temperature controller. Material materials, supplies involved in the application Temperature 400F (204C) Frequency 325kHz Equipmentā¦
Dateļ¼2008/02/03
-
induction soldering Brass
Soldering brass Objective To solder a brass end cap to a series of copper tubes Material Preassembled heat exchanger with copper tubes and 2 brass end caps 2.36ā (60mm) OD, 0.08ā to 0.12ā (2 to 3mm) thick at both ends, liquid solder Temperature 30ā¦
Dateļ¼2008/02/03
-
induction soldering Brass and copper
Soldering brass and copper Objective To heat brass and copper for soldering application on medical equipmentMaterial Brass ring, brass and copper pieces 5.11ā (130mm) long, 4.3ā (110mm) OD & 0.3ā (7mm) at thickest point and solder ringsTemperature 3ā¦
Dateļ¼2008/02/03
© Copyright 2021. uihm.com All Rights Reserved.