-
Keywords"coat"ļ¼total 10 records
-
induction heating steel into plastic clothes hanger, coat hanger, clothes tree
induction heating steel into plastic clothes hanger, coat hanger, clothes tree
Dateļ¼2017/12/12
-
remove plastic coating from steel tubes by induction heating
Objective Recover the polypropylene insulation from hollow steel tubes to allow recycling of both the tubes and the insulation. Material Hollow steel tubes 1/8ā (0.318 cm) to 5/8ā (1.59 cm) IDProtective polypropylene coating Temperature 150 C (302Fā¦
Dateļ¼2014/05/22
-
induction vacuum coating with multi um-dsp induction heater
induction vacuum coating with multi UM-DSP induction heater
Dateļ¼2014/01/01
-
induction coating by air cooled clamp induction coil
induction coating by air cooled clamp induction coilcustom desigh air-cooled clamp coilclamp induction coil with foot switch
Dateļ¼2014/01/01
-
ultra-high frequency(uhf) induction vacuum coating for solar collector tube
ultra-high frequency(UHF) induction vacuum coating for solar collector tubesinduction vacuum coating for solar collector tubeultra-high frequency(UHF) induction vacuum coating for solar collector tubeinduction heating solar collector tube
Dateļ¼2013/09/07
-
high frequency induction evaporation coating and painting silica-plated
Our UM-60AB-HF high frequency induction heating machine can be used for induction evaporation coating and induction painting Silica-plated, it will bring a quicker speed and safe work environment.High frequency induction evaporation coating(IGBT-50KW-30KHzā¦
Dateļ¼2013/05/03
-
induction heating of insert coat hanger
Induction heating can produce high power densities which allow short interaction times to reach the required temperature. This gives tight control of the heating pattern with the pattern following the applied magnetic field quite closely and allows reducedā¦
Dateļ¼2013/04/30
-
induction heat seat springs for powder coat
Heat seat springs for powder coat Objective Heat the steel spring assemblies of automotive seats to powder coatMaterial Steel wire springs ~24ā (61 cm) long, 1/8 ā (3.175mm) diameter cross sectionTemperature 500 F (250 C)Frequency 57 kHzEquipment Power ā¦
Dateļ¼2008/08/03
-
induction curing coating
Objective Curing a coating on both sides of an aluminum piston at a rate of 1ā (25.4mm) per secondMaterial 4 aluminum pistons weighing 1lb (.45kg) each, 3.75ā (95.25mm) dia and 2.5ā (63.5mm) highTemperature 225 F (107.2 C)Frequency 6 kHzEquipment ā¢ Powā¦
Dateļ¼2007/04/03
-
induction coating aluminum
Objective To heat an aluminum molding shape in order to activate an adhesive coating prior to applying the vinyl Material Aluminum molding folded from a flat sheet measuring 2ā³ wide and 0.03ā³ thick. The final form measures 5/8ā³ by 1ā³ Temperature 500Fā¦
Dateļ¼2007/04/03
© Copyright 2021. uihm.com All Rights Reserved.