induction brazing for wire connector_2induction brazing for wire connector_3induction brazing for wire connector_1

2010/04/30

custom-built induction coil with magnetic ferrite-0custom-built induction coil with magnetic ferrite

2010/04/30

induction brazing for stainless steel_1induction brazing for stainless steel_2

2010/04/30

flat pancake shape induction coils for induction brazing

2003/08/03

air-condition compression engine brazing_1air-condition compression engine brazing_2air-condition compression engine brazing_

2009/10/02

Sintering copper powder Objective Sintering copper powder to a stainless steel shaftMaterial Steel shaft & shell assembly, approx 2” (50.8mm) diameter, 2” (50.8mm) tall, copper powderTemperature 1600 F (871 C)Frequency 54 kHzEquipment • Power o…

2008/08/03

Hermetically sealing glass Objective Provide a hermetic seal of glass enclosed resistor to a leadMaterial ResistorKovar rings, 0.1 inch (0.254cm) diameterGlass tube slightly larger than 0.1 inch (0.254cm) diameter, 0.5 (1.27) inch lengthMetal leadTemp…

2008/08/03

silver brazing with induction heatingInduction Silver brazing actually uses not pure silver, but instead a silver alloy containing nonferrous metal to bond two pieces of metal together. The process is typically used to join close-fitting parts that re…

2008/02/03

Bin Brazing Pin Brazing forms part of a technology developed in Sweden throughout the latter half of the 20th century by AGA. The purpose, for attaching current carrying cables to what were deemed Sensitive Substrate Materials, or in this case Railroa…

2008/02/03

Heating brass mandrel die Objective Water-cooled brass mandrel die, nylon LDPE catheter, “K” type thermocouple and temperature controller.Material materials, supplies involved in the applicationTemperature 400F (204C)Frequency 325kHzEquipment Power …

2008/02/03