Bearing thermal desorption device works by using metal in the alternating magnetic field generates eddy currents in leaving itself fever, usually used in metal heat treatment and so on. Principle is thick metal in alternating magnetic field, the electroma

2013/06/07

Induction shrink fitting refers to the use of induction heater technology to pre-heat metal components between 150 C (302 F) and 300 C (572 F) thereby causing them to expand and allow for the insertion or removal of another component. Typically the lower

2013/06/03

induction heating is a very good method for shrinking fit work, quick speed, none-contact,environmental protected.shrinking fit for 2 shells

2013/04/10

High-frequency induction heating is successfully used for shrink-fit and renting unique details (bandages, all bore rotors of turbine parts, parts with bore powerful engines, bearing rings, propellers of ships, bore different parts forging equipment, etc.

2013/04/08

Induction Shrink Fitting for gears

2005/03/03

induction brazing and shrinking fit for big rotors

2010/04/30

Induction Shrink big axle

2010/04/30

Shrink Fit Cast Iron Objective To use induction to prepare cast iron assemblies for shrink fit assemblyMaterial Customer supplied cast iron rocker arms of varying sizesTemperature 450 F (232 C)Process Time 20 secondsFrequency 48 kHzEquipment Power of …

2008/02/03

Shrink fit steel gear Objective Heat the bore of a hardened spur steel gear to shrink fit onto a gear motor shaft. This is part of a chair for the disabled.Material Steel gear 2.5 h (63.5mm) OD, .75 h (19mm) ID x .625 h (16mm) thick, temperature indic…

2008/02/03

Shrink fitting carbide ring Objective Shrink fitting a carbide ring into a steel valve seatMaterial Steel valve seat 6” (152.4mm) OD with 3” (76.2mm) ID hole & .75” (19mm) thick, carbide ringTemperature 500 F ( 260 C)Frequency 55 kHzEquipment •…

2008/02/03