-
Keywords"the"，total 42 records
-
induction heating for plastic reflow with catheter tubing
Objective Heat a metal braid in a plastic catheter tube to 250F (121.1C) so that another catheter tube can be bonded to it. Material 0.05” (1.27mm)diameter catheter tubes, some with a metal braid, ceramic rod Temperature 250F(121.1C) Frequency 306kHz Equi…
Date：2014/05/21
-
temperature curve of induction thermal treatment after welding 600mw turbine valve
temperature curve of induction thermal treatment after welding 600MW turbine valve
Date：2014/01/01
-
induction preheating d5000mm end ring for welding by 2 um-dsp80a-hf at the same time
induction preheating D5000mm end ring for welding by 2 UM-DSP80A-HF at the same time
Date：2014/01/01
-
induction heating lever of crane by air cooled induction coil with homothermal status
induction heating lever of crane by air cooled induction coil with Homothermal status
Date：2014/01/01
-
induction heating small wire with strengthening coil
induction heating small wire with strengthening coil
Date：2003/08/11
-
custom-design induction coil for heating inwall and margin of the steel wheel
custom-design induction coil for heating inwall and margin of the steel wheel
Date：2003/08/11
-
800c thermal insulation blanket
800C thermal insulation blanket
Date：2008/06/30
-
500c thermal insulation blanket
500C thermal insulation blanket
Date：2008/06/30
-
high frequency induction brazing copper bars for the stator winding
High frequency induction brazing is an energy-saving technology. High power densities that are implemented in induction heating, allow to rapidly heat the local area to the soldering temperature 600 - 1200 C, at a cost of minimum energy process compared t…
Date：2013/04/08
-
high-frequency induction surface hardening working for the steel
induction hardening HDTV rotating bodies made with the rotation of hardened parts. Long parts hardened inductor in series with the movement along the axis of the member. Cooling the workpiece immediately after the heating is performed by jets of water or a…
Date：2013/04/08
© Copyright 2024. uihm.com All Rights Reserved.
