-
Keywords"Induction"ļ¼total 2889 records
-
Induction brazing brass faucet
Objective Brazing two joints on a brass bathroom faucet assembly Material Brass bathroom fittings 1ā OD, brazing rings, flux Temperature 1148 F (620 C) Frequency 90 kHz Equipment ā¢ Power of 90kW induction heating system, equipped with a remote workheā¦
Dateļ¼2007/04/03
-
Induction brazing manufacture needles
Objective Brazing stainless steel housings to stainless steel tube for gas assembly used in the manufacturing of needles Material 2 stainless steel housings .25ā (6.35mm) dia, .675 (17.1mm) & .54ā (13.7mm) in length, stainless steel tube .031ā (.78ā¦
Dateļ¼2007/04/03
-
Induction brazing copper pivot
Objective Brazing a copper pivot assembly Material Two copper uprights 2ā (5cm) wide x 4ā (10.2cm) high, copper base 3ā (7.6cm) x 2ā (5cm) and .5ā (1.3mm) thick with 2 channels for the uprights to the slide into, braze shims and black flux Temperatuā¦
Dateļ¼2007/04/03
-
Induction brazing heat-sensing probe
Objective To heat a coil and a wire assembly to 1300F (704C) within 60 seconds for brazing. Material Platinum coil, steel wire, braze paste Temperature 1300F (704C) Frequency 307kHz Equipment Power of 6KW output, remote heat station containing one 1.2 ā¦
Dateļ¼2007/04/03
-
Induction brazing dental tools
Objective To heat a steel tip and shank assembly to 1300F (704C) within 3 seconds for brazing with induction heating instead of torch brazing. Material 0.1ā (2.54mm) diameter steel tip & shank, 0.07ā (1.78mm) diameter braze ring Temperature 1300F (ā¦
Dateļ¼2007/04/03
-
Induction brazing steel orthodontic parts
Objective To heat a batch of orthodontic parts to 1300F (704C) within 1 second in an inert atmosphere for brazing. Material Small stainless steel orthodontic parts, silver braze alloy, no flux, 3 1/ 8ā (79.3mm) graphite susceptor disk with 1ā (25.4) cenā¦
Dateļ¼2007/04/03
-
Induction bonding rubber to steel
Objective To bond rubber gaskets to the top and bottom of a steel gas tank assembly. Material Flat and round rubber gaskets, steel gas tank assembly Temperature 300 to 350F(148.9-176.7C) Frequency 183 kHz for the flat gasket; 231 kHz for the round gaskeā¦
Dateļ¼2007/04/03
-
Induction coating aluminum
Objective To heat an aluminum molding shape in order to activate an adhesive coating prior to applying the vinyl Material Aluminum molding folded from a flat sheet measuring 2ā³ wide and 0.03ā³ thick. The final form measures 5/8ā³ by 1ā³ Temperature 500Fā¦
Dateļ¼2007/04/03
-
Induction brazing steel tube
Objective To braze a steel tube to a steel āTā fitting Material 1ā (25.4mm) diameter steel tubing, steel fitting, braze slug and black flux Temperature 1400F (760C) Frequency 198 kHz Equipment ā¢ Power of 15kW induction heating system, equipped withā¦
Dateļ¼2007/04/03
-
Induction brazing stainless steel dental assembly
Objective To heat a steel dental assembly to 1400F (760C) for brazing Material Stainless steel plates 0.118ā (3mm) square and 0.078ā (2mm) high, stainless steel hook, mesh, two pieces of graphite 0.375ā(9.5mm) square cross section, 4ā (101.6mm) long aā¦
Dateļ¼2007/04/03
© Copyright 2021. uihm.com All Rights Reserved.