-
Keywords"curing"ļ¼total 6 records
-
induction curing adhesive for steel motor shaft
Objective: induction Curing Adhesive for the internal wall (inner interface) of a steel motor shaft to bond electronic stress/strain gauges into place.Material: Steel shaft measuring 6.65" (168.9mm) OD, 5.5"(139.7mm) ID and 70" (1.8m) long. ā¦
Dateļ¼2013/07/05
-
induction curing epoxy
Objective Heat the end of an aluminum copier roller to 400 F (200 C) to cure epoxyMaterial Aluminum roller 4.75ā (120mm) diameter, 2ā (0.6m) long with 1.5ā (38.1mm) thick plug at endTemperature 400 F (200 C)Frequency 52 kHzEquipment ā¢ Power of 25 kW inā¦
Dateļ¼2007/04/03
-
induction curing coating
Objective Curing a coating on both sides of an aluminum piston at a rate of 1ā (25.4mm) per secondMaterial 4 aluminum pistons weighing 1lb (.45kg) each, 3.75ā (95.25mm) dia and 2.5ā (63.5mm) highTemperature 225 F (107.2 C)Frequency 6 kHzEquipment ā¢ Powā¦
Dateļ¼2007/04/03
-
induction curing adhesive
Objective To Cure adhesive in aluminum filter endsMaterial Aluminum filter, steel end caps & plastisol adhesiveTemperature 200 FFrequency 277 kHzEquipment Power of 6kW induction heating system, equipped with a remote workhead containing two 0.1uF capaā¦
Dateļ¼2007/04/03
-
induction curing ceramic fiber
Objective To heat-cure a NextelTM Ceramic fiberMaterial Ceramic fiber 30,000 (9,145) ft(m) Steel tubeTemperature indicating paintTemperature 1300(700) F(C)Frequency 70 kHzEquipment Power of 45kW, 50-450 kHz solid-state induction power supply with a remote ā¦
Dateļ¼2007/04/03
-
induction curing measuring tape paint
Objective To heat measuring tape stock at a maximum rate of 600 feet per minute to cure the applied paint. The heating coil is to accommodate the 3/8ā³ wide stock within the customerās current framework. Curing must occur above 400F at the rate specified.ā¦
Dateļ¼2007/04/03
© Copyright 2021. uihm.com All Rights Reserved.