Induction Brazing copper pivot
Views Send Enquiry
Objective Brazing a copper pivot assembly
Material Two copper uprights 2” (5cm) wide x 4” (10.2cm) high, copper base 3” (7.6cm) x 2” (5cm) and .5” (1.3mm) thick with 2 channels for the uprights to the slide into, braze shims and black flux
Temperature 1350 ºF (732 ºC)
Frequency 190 kHz
Equipment • Power of 20kW induction heating system, equipped with a remote workhead containing two 1.0μF capacitors for a total of 0.5μF
• An induction heating coil designed and developed specifically for this application.
Process A three turn helical coil is used to heat the base of the assembly. The copper uprights and two braze shims are placed in the grooves in the base and black flux is applied. The assembly is placed in the coil and power is applied for 4 minutes to braze both the uprights in place.
Results/Benefits Induction heating provides:
• Rapid localized heat which can minimize oxidation and reduce cleaning after joining
• Consistent and repeatable joints
• Hands-free heating that involves no operator skill for manufacturing
• Even distribution of heating
Material Two copper uprights 2” (5cm) wide x 4” (10.2cm) high, copper base 3” (7.6cm) x 2” (5cm) and .5” (1.3mm) thick with 2 channels for the uprights to the slide into, braze shims and black flux
Temperature 1350 ºF (732 ºC)
Frequency 190 kHz
Equipment • Power of 20kW induction heating system, equipped with a remote workhead containing two 1.0μF capacitors for a total of 0.5μF
• An induction heating coil designed and developed specifically for this application.
Process A three turn helical coil is used to heat the base of the assembly. The copper uprights and two braze shims are placed in the grooves in the base and black flux is applied. The assembly is placed in the coil and power is applied for 4 minutes to braze both the uprights in place.
Results/Benefits Induction heating provides:
• Rapid localized heat which can minimize oxidation and reduce cleaning after joining
• Consistent and repeatable joints
• Hands-free heating that involves no operator skill for manufacturing
• Even distribution of heating
Brazing-copper-pivot
Good
Bad
Related Content
Air Cooled clamp coil (half-open coil) for preheating gas pipeline
induction coating by air cooled clamp induction coil
Remove plastic coating from steel tubes by Induction Heating
Releasing Fixture by Induction Heating
U shape air cooled induction coil by UM-100C-HF for pipeline preheating
induction quenching with custom-design inductor
induction brazing diamond segment
induction brass soldering copper plate_2
Hot
induction brass soldering for copper bricks
induction brass soldering stator ends of wind driven generator within 2 seconds
ultra-high frequency induction brass soldering
induction brass solering_2
induction brass solering_1
induction brass soldering_2
induction brass soldering_1
induction brass soldering
Newest Comment
Post Comment