Induction quenching equipment for machine tools
Views Send Enquiry
Machine Tool quenching machine equipment
First, the Machine Tool quenching equipment use:Mainly used in the machining industry, for users to solve the track surface do not wear, not durable technical problems. Rail by quenching to improve their hardness, thus ensuring the normal operation of the machine.
Second, the Machine Tool quenching equipment in the course of the advantages
1, Machine Tool quenching equipment efficiency, energy saving.
2, Machine Tool quenching hardness uniform, consistent, hardened layer is moderate.
3, quenching hardness meets the requirements, quenching is not deformed.
4, quenching sensors work fine, if the track is too wide, the sensor can be unilateral quenching, if the track is narrow, can be bilateral quenching.
Third, the Machine Tool quenching achieved technical indicators:
A guide rail hardened layer depth is generally 1.5-3mm, hardness HRC45-52;
2 quenching deformation is less than 0.06mm;
3.Heating faster,200-400mm / mim.
Fourth, the Machine Tool quenching equipment recommended models
1,80 KW and 120KW 160KW facilitate greater cross-sectional Machine Tool and gear quenching.
2, walking speed: dual-rail with quenching :200-400mm / min (depending on section size set).
Five, Machine Tool quenching machine equipment major component
1, IGBT super audio power;
2, UM-C type self-quenching machine.
System has a longitudinal (along the bed axial) movement, vertical and the machine moves back and forth, rising and falling motion sensor scans the main movement.
3, water chillers.
Six, Machine Tool quenching machine equipment technical service and support
1, product quality for long-term tracking service.
2, the product of the installation and commissioning, technical guidance and training.
3, the product of three policies. Within one year of free maintenance and lifetime maintenance.
Next: Bearing induction heat removalPrevious: noncontact quick induction heating
Good
Bad
Related Content
induction quenching with custom-design inductor
induction quenching surface
induction quenching head and end part of steel rod (axle)
induction quenching axle (shaft) by 160KW induction heater
induction quenching gear teeth
induction quenching axle
induction quenching axle (shaft)
induction quenching axle (shaft) by 120KW induction heater (UM-120AB-HF)
Hot
induction hardening axle (shaft) by 100KW induction heater
induction quenching axle (shaft) by 160KW induction heater
induction hardening inner surface (inwall)
Induction Hardening Harvestor Combined Finger
Induction Hardening Harvestor Combined Blade
workpiece for induction hardening
induction hardening veterinary instrument
induction hardening surgical device
Newest Comment
No Comment
Post Comment