Induction Heating Inconnel Susceptor
Views Send Enquiry
Objective: Heat an Inconnel susceptor to 19500F in less than one (1) minute for heating jet engine fan blades. This approach is to be used, instead of directly heating the blade, since improved temperature uniformity will be achieved. Heating is to take place in an Argon atmosphere.
Material: Inconnel Susceptor measuring 1 3/8″ wide by 2″ long by 3/4″ thick
Temperature: 19500F
Application: Through laboratory testing, the Power of 10KW,10kW output solid state induction power supply along with a four turn elongated helical coil were used to achieve the following results:
# 19500F was reached in forty five (45) seconds.
# An even heating pattern was observed throughout the Inconnel block
Equipment: Power of 10KW,10kW output solid state induction power supply including one (1) remote heat station containing two (2) capacitors with a total value of 0.66 μF, and a unique four (4) turn elongated helical work coil.
Frequency: 215 kHz
heating Inconnel Susceptor
Related Content
Air Cooled clamp coil (half-open coil) for preheating gas pipeline
induction coating by air cooled clamp induction coil
Remove plastic coating from steel tubes by Induction Heating
Releasing Fixture by Induction Heating
U shape air cooled induction coil by UM-100C-HF for pipeline preheating
induction quenching with custom-design inductor
induction brazing diamond segment
induction brass soldering copper plate_2
Hot
induction heating bolts from turbine
induction debonding from steel rod
induction debonding rubber
Releasing Fixture by Induction Heating
Remove plastic coating from steel tubes by Induction Heating
Induction Heating catheter tipping die
Induction Molding for teflon catheter tip
induction melting for crystal growth
Newest Comment
No Comment
Post Comment