Induction Heating carbon graphite anodes
Views Send Enquiry
Objective Heating carbon graphite anodes to destructively oxidize the parts to process embedded contaminants
Material anodes 2.5 x 2.5 x 4 (63 x 63 x 102) h x w x d in (mm)
Temperature 1900 °F 1000°C
Frequency 54 kHz
Equipment Power of 70kW induction heating system, custom multi-turn helical coil, 4 cap 1.0μF workhead
Process An air purge system is used to provide fresh air (~25 f3/hr) to the part during the heat cycle and to provide a swirling action for maximum contact with the surface of the anode.
The anode is placed inside the induction-heating coil and heated to a temperature of 1000°C. After 2.5 hours, the anode
burns to about 0.375 inch diameter piece.
A pyrometer/controller is used to provide constant temperature as the anode reduces in size.
Results/Benefits Induction heating allows this process to be very efficient and controllable
Heating carbon graphite anodes
Related Content
Air Cooled clamp coil (half-open coil) for preheating gas pipeline
induction coating by air cooled clamp induction coil
Remove plastic coating from steel tubes by Induction Heating
Releasing Fixture by Induction Heating
U shape air cooled induction coil by UM-100C-HF for pipeline preheating
induction quenching with custom-design inductor
induction brazing diamond segment
induction brass soldering copper plate_2
Hot
induction heating bolts from turbine
induction debonding from steel rod
induction debonding rubber
Releasing Fixture by Induction Heating
Remove plastic coating from steel tubes by Induction Heating
Induction Heating catheter tipping die
Induction Molding for teflon catheter tip
induction melting for crystal growth
Newest Comment
No Comment
Post Comment