-
Keywords"in"ļ¼total 3004 records
-
induction heating catheter tipping die
Heating Catheter Tipping Die Objective: To heat an aluminum catheter tipping die to above 2850F within 2 to 5 seconds for the forming of catheter material. Presently, heating is performed in 15 seconds with older induction equipment. The customer would likā¦
Dateļ¼2008/02/03
-
induction heating fan blades for welding
Heating fan blades for welding Objective To uniformly heat jet engine turbine fan blades to 1800F (982.2C) within five minutes for a welding applicationMaterial Jet engine turbine fan blades with 2ā(50.8mm) length tipTemperature 1800F (982.2C)Frequency 21ā¦
Dateļ¼2008/02/03
-
induction soldering co-axial wire
Soldering Co-axial Wire Objective To solder center-conductor and shielding braid of wireassemblies to 500 (250) F(C).Material ā¢ Customer-supplied assembliesā¢ Temperature indicating paintā¢ Flux-cored solder wireTemperature 500 (250) F (C)Frequency 272 kHā¦
Dateļ¼2008/02/03
-
induction soldering wires onto connector
Soldering wires onto connector Objective Heat connector assemblies for solderingMaterial Device assemblyTin plated brass terminals Solder pasteTemperature 500F (260C) 5-7 secondsFrequency 360 kHzEquipment Power of 6 kW induction heating system equipped witā¦
Dateļ¼2008/02/03
-
induction soldering satellite antennas
Soldering satellite antennas Objective Soldering steel onto GPS body for phone antennaMaterial Thin copper foil 0.3mm (0.01 in) thick Ceramic body 12mm (0.47 in.) long x 7mm (0.28 in.) wideTemperature 200 C (392 F)Frequency 371 kHzProcess Time 5 secondsEquā¦
Dateļ¼2008/02/03
-
induction soldering brass
Soldering brass Objective To solder a brass end cap to a series of copper tubes Material Preassembled heat exchanger with copper tubes and 2 brass end caps 2.36ā (60mm) OD, 0.08ā to 0.12ā (2 to 3mm) thick at both ends, liquid solder Temperature 30ā¦
Dateļ¼2008/02/03
-
induction soldering circuit boards
Soldering circuit boards Objective To heat post, lead or lead-free solder preforms for various circuit board soldering applications.Material Upper and lower circuit boards, small and large lead or lead free preforms.Temperature < 700 F (371C) depending ā¦
Dateļ¼2008/02/03
-
induction soldering brass and copper
Soldering brass and copper Objective To heat brass and copper for soldering application on medical equipmentMaterial Brass ring, brass and copper pieces 5.11ā (130mm) long, 4.3ā (110mm) OD & 0.3ā (7mm) at thickest point and solder ringsTemperature 3ā¦
Dateļ¼2008/02/03
-
induction soldering fabric to kovar tip
Soldering fabric to kovar tip Material Kovar cone, base 3/8ā (9.5mm) dia, cone 3/8ā (9.5mm) high, solderTemperature 300 F (149 C)Frequency 242 kHzEquipment ā¢ Power of 3.2 kW induction heating system, equipped with a remote workhead containing one 1.2Ī¼Fā¦
Dateļ¼2008/02/03
-
induction soldering connectors together
Soldering connectors together Objective Soldering two connectors simultaneously to a tin plated copper ground plateMaterial Tin plated copper ground plate 4ā x 1.75ā (101.6mm x 44.45mm), 2 connectors, one with12 pins & one with 4 pins and 60/40 soldeā¦
Dateļ¼2008/02/03
© Copyright 2021. uihm.com All Rights Reserved.