-
Keywords"in"ļ¼total 3004 records
-
induction debond rubber seal from steel
Objective Debond a fluorocarbon rubber seal from a carbon steel oil seal Material 4ā (10.2cm) OD carbon steel oil seal with a fluorocarbon rubber seal Temperature 1200 F (649 C) Frequency 179 kHz Equipment ā¢ Power of 6kW induction heating system, equiā¦
Dateļ¼2007/04/03
-
induction bonding gasket to nut
Objective To heat a steel sombrero nut prior to gasket bonding Material ā¢ Steel sombrero-shaped nut approx. 2ā (50.8mm) diameter, 2ā (50.8mm) in height ā¢ gasket Temperature 350 F (176 C) Frequency 266 kHz Equipment ā¢ Power of 6kW induction heatingā¦
Dateļ¼2007/04/03
-
induction brazing thin walled tube
Objective Braze a NI-SPAN-C alloy tube to a steel cap in a hydrogen atmosphere Material NI-SPAN-C alloy tube (5mm) dia, steel cap (7mm) dia, (7mm) long, nickel braze, quartz tube and hydrogen Temperature 1875 F (1024 C) Frequency 313 kHz Equipment ā¢ Pā¦
Dateļ¼2007/04/03
-
induction brazing piston valve
Objective Brazing a steel piston valve assembly Material Steel piston valve 4.5ā dia (11.43cm), tungsten carbide plate and braze Temperature 1350 F Frequency 91 kHz Equipment ā¢ Power of 90kW induction heating system, equipped with a remote workhead cā¦
Dateļ¼2007/04/03
-
induction brazing brass faucet
Objective Brazing two joints on a brass bathroom faucet assembly Material Brass bathroom fittings 1ā OD, brazing rings, flux Temperature 1148 F (620 C) Frequency 90 kHz Equipment ā¢ Power of 90kW induction heating system, equipped with a remote workheā¦
Dateļ¼2007/04/03
-
induction brazing manufacture needles
Objective Brazing stainless steel housings to stainless steel tube for gas assembly used in the manufacturing of needles Material 2 stainless steel housings .25ā (6.35mm) dia, .675 (17.1mm) & .54ā (13.7mm) in length, stainless steel tube .031ā (.78ā¦
Dateļ¼2007/04/03
-
induction brazing copper pivot
Objective Brazing a copper pivot assembly Material Two copper uprights 2ā (5cm) wide x 4ā (10.2cm) high, copper base 3ā (7.6cm) x 2ā (5cm) and .5ā (1.3mm) thick with 2 channels for the uprights to the slide into, braze shims and black flux Temperatuā¦
Dateļ¼2007/04/03
-
induction brazing heat-sensing probe
Objective To heat a coil and a wire assembly to 1300F (704C) within 60 seconds for brazing. Material Platinum coil, steel wire, braze paste Temperature 1300F (704C) Frequency 307kHz Equipment Power of 6KW output, remote heat station containing one 1.2 ā¦
Dateļ¼2007/04/03
-
induction brazing dental tools
Objective To heat a steel tip and shank assembly to 1300F (704C) within 3 seconds for brazing with induction heating instead of torch brazing. Material 0.1ā (2.54mm) diameter steel tip & shank, 0.07ā (1.78mm) diameter braze ring Temperature 1300F (ā¦
Dateļ¼2007/04/03
-
induction brazing steel orthodontic parts
Objective To heat a batch of orthodontic parts to 1300F (704C) within 1 second in an inert atmosphere for brazing. Material Small stainless steel orthodontic parts, silver braze alloy, no flux, 3 1/ 8ā (79.3mm) graphite susceptor disk with 1ā (25.4) cenā¦
Dateļ¼2007/04/03
© Copyright 2021. uihm.com All Rights Reserved.