induction shrink fitting for rotor and stator_1induction shrink fitting for rotor and stator_2

Date：2003/08/11

induction coil for shrink fitting_2

Date：2003/08/11

induction coil for shrink fitting_1

Date：2003/08/11

Induction shrink fitting refers to the use of induction heater technology to pre-heat metal components between 150 C (302 F) and 300 C (572 F) thereby causing them to expand and allow for the insertion or removal of another componentinduction shrink fittin…

Date：2013/07/29

Most applications involve a shaft with a given outside diameter and another part such as a bearing, gear, steering knuckle or washer which has a bore hole. There are several forms of this type of joint, characterized by the amount of tolerance (space) betw…

Date：2013/06/03

Induction Shrink Fitting for gears

Date：2005/03/03

Shrink Fit Cast Iron Objective To use induction to prepare cast iron assemblies for shrink fit assemblyMaterial Customer supplied cast iron rocker arms of varying sizesTemperature 450 F (232 C)Process Time 20 secondsFrequency 48 kHzEquipment Power of 25kW,…

Date：2008/02/03

Shrink fit steel gear Objective Heat the bore of a hardened spur steel gear to shrink fit onto a gear motor shaft. This is part of a chair for the disabled.Material Steel gear 2.5 h (63.5mm) OD, .75 h (19mm) ID x .625 h (16mm) thick, temperature indicating…

Date：2008/02/03

Shrink fitting carbide ring Objective Shrink fitting a carbide ring into a steel valve seatMaterial Steel valve seat 6” (152.4mm) OD with 3” (76.2mm) ID hole & .75” (19mm) thick, carbide ringTemperature 500 F ( 260 C)Frequency 55 kHzEquipment • Pow…

Date：2008/02/03

Shrink fitting impeller blades to shaft Objective Heat aluminum impeller blades to 200 F (93 C) and shrink fit onto a shaft.Material Aluminum impeller blades with a .28” (7.109mm) bore, aluminum shaftTemperature 200 F (93 C)Frequency 255 kHzEquipment • P…

Date：2008/02/03