-
Keywords"Steel"ļ¼total 554 records
-
induction brazing Steel fitting
Objective To heat a steel hydraulic hose fitting in an inert atmosphere to 2200F within 7 seconds for brazing without any carbon buildup. Material Three-opening steel hydraulic fitting, pure copper braze paste Temperature 2200F Frequency 273 kHz Equipmā¦
Dateļ¼2005/10/02
-
induction brazing Steel conduit
Objective To heat a stainless steel conduit, ferrule and elbow assembly to 1400F (760C) within 20 seconds for brazing. Material 6ā(152.4mm)long x 0.5ā(12.7mm) diameter stainless steel conduit, 0.5ā(12.7mm) long x 0.5ā(12.7mm) diameter ferrule, 2ā(50.ā¦
Dateļ¼2005/10/02
-
induction annealing Steel tubes
Objective To heat steel tubes to 2000 F (1093 C) in an inert atmosphere Material 0.1ā (2.54mm) diameter stainless steel tube Temperature 2000 F Frequency 333 kHz Equipment ā¢ 10 kW induction heating system, equipped with a remote workhead containingā¦
Dateļ¼2006/10/02
-
induction annealing Steel wire
Objective To heat 3ā (76.2mm) from the end of the wire on a woven wire cloth 60ā (1.52m) long. This prepares the wire mesh for bending in a press brake. Material Woven wire cloth (steel) made of 1/2ā (12.7) diameter wire, 60ā (1.52m) long. Wires are 1ā¦
Dateļ¼2006/10/02
-
induction annealing Steel shaft
Objective Heating a steel rod to 1200F (649C) for an annealing, stress relief application Material 1.062ā (26.97mm) dia type T-410 stainless steel bar 6ā (1.82m) long & 1.25ā (31.75mm) dia T-416 stainless steel bar 6ā (1.82m) long Temperature 120ā¦
Dateļ¼2006/10/02
-
induction brazing a carbide to a stainless Steel shaft
Objective : Brazing a cone shaped carbide to a stainless steel shaft for a digger Material : Cone shaped carbide 1.12ā (28.4mm) dia, 1.5ā(38.1mm) tall,stainless steel shaft 1.12ā (28.4mm) dia and various length, black brazing flux and braze shims Tempā¦
Dateļ¼2006/03/30
-
induction soldering Steel to brass
Objective Heat an assembly of small, gold-plated steel connectors to a brass block. Approx. 1/8ā (3.2mm) diameter gold-plated steel connectors, 1ā(25.4mm) square x 1/4ā thick brass block ,600F(315.6C),240 kHz Temperature,Frequency,Equipment 6 kW inā¦
Dateļ¼2006/03/28
-
induction annealing stainless Steel
Induction Annealing stainless steel bread cutting saw blades Objective: Anneal saw blades used for cutting bread, prior to hole punching. Material :.38ā (9.6mm) wide and .51ā (12.9mm) wide continuous strips of 400 series stainless steel. Temperaā¦
Dateļ¼2006/03/28
-
induction welding Steel pipes
Steel welding using induction heating to produce pipelines is found to have lower toughness at the weld junction than the base material, even after a heat treatment which reaustenitises the weld zone. Detailed crystallographic characterisation indicates thā¦
Dateļ¼2013/06/02
-
induction tempering of Steel
The tempering of hardened steels is surely one of the most important of industrial heat-treating operations. For this reason, the mechanisms underlying the process as well as the effect of tempering on final mechanical properties have received wide attentiā¦
Dateļ¼2013/05/16
© Copyright 2021. uihm.com All Rights Reserved.