-
Keywords"shaft"ļ¼total 59 records
-
induction shrink fitting impeller blades to shaft
Shrink fitting impeller blades to shaft Objective Heat aluminum impeller blades to 200 F (93 C) and shrink fit onto a shaft.Material Aluminum impeller blades with a .28ā (7.109mm) bore, aluminum shaftTemperature 200 F (93 C)Frequency 255 kHzEquipment ā¢ Pā¦
Dateļ¼2008/02/03
-
induction shrink fit camshaft gear
Shrink Fit Camshaft Gear Objective: Heating a camshaft gear with a bore size of 1.630 to shrink fit over a steel shaft that has a diameter of 1.632. A temperature of 5000F is required for the gear to expand 0.002 in order to slip over the shaft. Productionā¦
Dateļ¼2008/02/03
-
induction shrink fitting cam shaft gears
Shrink Fitting Cam Shaft Gears Objective To heat aluminum and steel camshaft gears to over 500F within 4 minutes for a shrink fitting application.Material 6ā diameter, 2ā thick steel and aluminum camshaft gears, āKā type thermocouple, digital thermometā¦
Dateļ¼2008/02/03
-
induction case hardening shaft
Case hardening shafts Objective Harden the gear end of an armature shaft to 58-65 Rockwell C at a depth of 0.02ā³(.51mm) on the center line of the teeth and to 49-55 Rockwell C at a depth of .010ā³ (.3mm) on the center line of the root. Material Steā¦
Dateļ¼2007/04/03
-
induction brazing carbide to steel shaft
Objective Brazing a cone shaped carbide to a stainless steel shaft for a digger Material Cone shaped carbide 1.12ā (28.4mm) dia, 1.5ā(38.1mm) tall, stainless steel shaft 1.12ā (28.4mm) dia and various length, black brazing flux and braze shims Temperaā¦
Dateļ¼2007/04/03
-
induction brazing carbide shaft to steel tube
Objective Braze a carbide shaft to a steel tube Material Carbide shaft 1/8ā to 1ā diameter (varying sizes) Steel tube 3/8ā to 1 ā OD Silver solder braze Temperature indicating paint Temperature 1400 F for 60 seconds Frequency 220 kHz Equipment Powā¦
Dateļ¼2005/10/02
-
induction annealing motor shaft
Objective Annealing the end of a steel hydraulic motor shaft prior to machining Material .75ā (19mm) diameter steel rod, 6ā (152.4mm) long with a keyway at the end Temperature 1350 F (732 C) Frequency 359 kHz Equipment ā¢ UM-06A-UHF induction heatingā¦
Dateļ¼2006/10/02
-
induction annealing steel shaft
Objective Heating a steel rod to 1200F (649C) for an annealing, stress relief application Material 1.062ā (26.97mm) dia type T-410 stainless steel bar 6ā (1.82m) long & 1.25ā (31.75mm) dia T-416 stainless steel bar 6ā (1.82m) long Temperature 120ā¦
Dateļ¼2006/10/02
-
induction brazing a carbide to a stainless steel shaft
Objective : Brazing a cone shaped carbide to a stainless steel shaft for a digger Material : Cone shaped carbide 1.12ā (28.4mm) dia, 1.5ā(38.1mm) tall,stainless steel shaft 1.12ā (28.4mm) dia and various length, black brazing flux and braze shims Tempā¦
Dateļ¼2006/03/30
© Copyright 2021. uihm.com All Rights Reserved.