Induction Stainless Steel Hot Forming
Views Send Enquiry
Objective: To heat a stainless steel “J” tape to 3000F from room temperature at a rate of 15 feet per minute. The material is to be heated to aid in forming the “J” shape from flat stock.
Material: Stainless Steel “J” Tape measuring 0.562″ wide, 0.028″ thick and continuously fed.
Temperature: 3000F
Frequency: 52 kHz
Application: Power of 35KW output solid state induction power supply along with a fifteen (15) turn rectangular helical coil were found to produce the following result:
3000F was reached on a 6″ section within 2 seconds in a static test which translates into over 15 feet per minute.
Equipment: Power of 35KW output solid state induction power supply including one (1) remote heat station containing one (1) capacitor with a value of 1.2 μF, and a unique fifteen (15) turn oval coil 6″ long, 1 1/4″ wide and 1″ high
Related Content
Air Cooled clamp coil (half-open coil) for preheating gas pipeline
induction coating by air cooled clamp induction coil
Remove plastic coating from steel tubes by Induction Heating
Releasing Fixture by Induction Heating
U shape air cooled induction coil by UM-100C-HF for pipeline preheating
induction quenching with custom-design inductor
induction brazing diamond segment
induction brass soldering copper plate_2
Hot
induction heating bolt
induction heating steel rod by UM-40AB-HF
induction heating end of pipeline by 160kw induction heater
induction heating steel plates by auto feed system with 120KW induction heater
induction heating cambered work-piece by 160KW power supply
Induction heating for Plastic Reflow With Catheter Tubing
U shape induction coil for heating hole
induction heating steel rod with double coils
Newest Comment
No Comment
Post Comment