Induction Hot Forming Titanium Rod
Views Send Enquiry
Objective To heat a titanium rod to 1700°F (926.7°C) within 60 seconds for hot forming.
Material Titanium rods, 1.25”(31.8mm) diameter, 5”(127mm) length
Temperature 1700°F (926.7°C)
Frequency 70 kHz
Equipment • Power of 60kW induction heating system, equipped with a remote workhead.
• An induction heating coil designed and developed specifically for this application.
Process A specially designed thirteen-turn helical induction coil is used to heat the titanium rod to 1700ºF (926.7°C). Two optical pyrometers are used to measure the temperature at the surface and center of the part. Both the surface and center of the titanium rod are heated to 1700ºF (926.7°C) within 60 seconds.
Results/Benefits Induction heating provides:
• Improved production rates with minimal defects
• Improved mechanical properties
• Even distribution of heating
Related Content
Air Cooled clamp coil (half-open coil) for preheating gas pipeline
induction coating by air cooled clamp induction coil
Remove plastic coating from steel tubes by Induction Heating
Releasing Fixture by Induction Heating
U shape air cooled induction coil by UM-100C-HF for pipeline preheating
induction quenching with custom-design inductor
induction brazing diamond segment
induction brass soldering copper plate_2
Hot
induction heating bolt
induction heating steel rod by UM-40AB-HF
induction heating end of pipeline by 160kw induction heater
induction heating steel plates by auto feed system with 120KW induction heater
induction heating cambered work-piece by 160KW power supply
Induction heating for Plastic Reflow With Catheter Tubing
U shape induction coil for heating hole
induction heating steel rod with double coils
Newest Comment
No Comment
Post Comment