Steel Induction heat treatment
Views Send Enquiry
Overall heat treatment is heating the whole piece, then the appropriate speed cooling, to change its overall mechanical properties of the metal heat treatment process. Roughly the overall heat treatment of steel annealing, normalizing, quenching and tempering are four basic processes.
“Four fire” as the Induction machine temperature and cooling of different ways, but it turns out different heat treatment process. In order to obtain a certain degree of strength and toughness, the combination of quenching and tempering process, known as quenching. Some alloys supersaturated solid solution hardening form, will be placed in the appropriate room temperature or slightly higher temperature to maintain a longer time to improve the hardness, strength or power of magnetism. This heat treatment process known as aging. The pressure deformation and heat treatment process effective and closely integrated to allow the workpiece to obtain good strength and toughness with a method called thermomechanical treatment; in vacuum atmosphere or a vacuum heat treatment known as vacuum heat treatment, which not only enables workpiece is not oxidized, no decarburization, maintaining smooth surface treatment to improve the performance of the workpiece, but also through the infiltration of agents for chemical heat treatment.
Heat treatment is the mechanical parts and tool and die manufacturing process one of the important processes. Broadly speaking, it can guarantee and improve the various properties of the workpiece, such as wear, corrosion and so on. Can also improve the rough state of the organization and stress, in order to facilitate a variety of cold and hot processing.
For example, after prolonged annealing of white cast iron can be malleable iron, increased plasticity; gear using the correct heat treatment process, life can be more than doubled without heat treatment of gear or a few times to improve; In addition, the inexpensive steel through infiltration Some alloying elements on the price of expensive alloy steel has some performance, you can replace some of the heat-resistant steel, stainless steel; tooling is almost all need to go through heat treatment before use.
Next: IGBT Induction Heater ProfilesPrevious: Induction Hot Forming Titanium Rod
Good
Bad
Related Content
Air Cooled clamp coil (half-open coil) for preheating gas pipeline
induction coating by air cooled clamp induction coil
Remove plastic coating from steel tubes by Induction Heating
Releasing Fixture by Induction Heating
U shape air cooled induction coil by UM-100C-HF for pipeline preheating
induction quenching with custom-design inductor
induction brazing diamond segment
induction brass soldering copper plate_2
Hot
induction heating bolt
induction heating steel rod by UM-40AB-HF
induction heating end of pipeline by 160kw induction heater
induction heating steel plates by auto feed system with 120KW induction heater
induction heating cambered work-piece by 160KW power supply
Induction heating for Plastic Reflow With Catheter Tubing
U shape induction coil for heating hole
induction heating steel rod with double coils
Newest Comment
No Comment
Post Comment