Induction Heating Graphite Susceptor
Views Send Enquiry
Heating Graphite Susceptor
Objective
To Heat a graphite susceptor to 1100°C in an inert atmosphere of Nitrogen and Hydrogen. The susceptor is to be used for metal oxide chemical vapor deposition (MOCVD) crystal growth experiments. Verification of temperature reached is critical.
Material Graphite Susceptor measuring 3″ in diameter and 1 1/4″ thick.
Temperature 1100°C
Frequency 171 kHz
Equipment Power of 30KW solid state induction power supply including one (1) remote heat station containing two (2) 1.0 μF capacitors and a high voltage transformer, and a four (4) turn helical coil with a 5″ inside diameter and a length of 1 1/2″.
Process The Power of 30KW solid state induction power supply with a four (4) turn helical coil and a two color IR optical pyrometer were used to achieve the following results:
Results • 1100°C was reached in five (5) minutes as read from the two color IR optical pyrometer.
• An even heat pattern was observed.
Related Content
Air Cooled clamp coil (half-open coil) for preheating gas pipeline
induction coating by air cooled clamp induction coil
Remove plastic coating from steel tubes by Induction Heating
Releasing Fixture by Induction Heating
U shape air cooled induction coil by UM-100C-HF for pipeline preheating
induction quenching with custom-design inductor
induction brazing diamond segment
induction brass soldering copper plate_2
Hot
induction heating bolts from turbine
induction debonding from steel rod
induction debonding rubber
Releasing Fixture by Induction Heating
Remove plastic coating from steel tubes by Induction Heating
Induction Heating catheter tipping die
Induction Molding for teflon catheter tip
induction melting for crystal growth
Newest Comment
No Comment
Post Comment