Induction Heating Light Bulbs
Views Send Enquiry
Objective To heat two 0.5″ getters to a red glow inside a light bulb in
order to fire the getters within 8 seconds. Presently the bulbs
are lowered onto an eight station turnstile with an index time of
8 seconds.
Material Metal Halide Lamp containing two 0.5″ diameter getters of
unknown composition.
Temperature 1300ºF to 1500ºF
Frequency 350 kHz
Equipment Power of 6 kW solid state induction power supply including one remote heat station containing one (1) capacitor totaling 0.66 μF, and a unique coil comprised of four (4) parallel two (2) turn coils.
Process By using the UIHM 5 kW solid state induction power supply the following results were achieved:
Results • Both getters were fired within 2.5 seconds through the use of a unique helical coil comprising of four (4) parallel two (2) turn coils and the 4-20 mA fast ramp input.
• The 2.5 second firing cycle allows for the coil to be move around the part and away within the indexing time
of the turnstile table.
Related Content
Air Cooled clamp coil (half-open coil) for preheating gas pipeline
induction coating by air cooled clamp induction coil
Remove plastic coating from steel tubes by Induction Heating
Releasing Fixture by Induction Heating
U shape air cooled induction coil by UM-100C-HF for pipeline preheating
induction quenching with custom-design inductor
induction brazing diamond segment
induction brass soldering copper plate_2
Hot
induction heating bolts from turbine
induction debonding from steel rod
induction debonding rubber
Releasing Fixture by Induction Heating
Remove plastic coating from steel tubes by Induction Heating
Induction Heating catheter tipping die
Induction Molding for teflon catheter tip
induction melting for crystal growth
Newest Comment
No Comment
Post Comment