Induction Heating aluminium susceptor
Views Send Enquiry
Objective Expand powder into solid form for use in crash helmets
Material Microspheric powder
Aluminium chamber 110mm (4.3 in.) diameter x 35mm (1.3 in.) deep used to hold powder
Temperature 150 oC (302 oF)
Frequency 54.5 kHz
Process Time 20 seconds
Equipment . Power of 35 kW induction heating system, equipped with a remote workhead containing (4) 2.6 ƒÊF capacitors (for a total of 2.6 ƒÊF).
. Two pancake coils 110mm (4.3 in) dia. with 45mm (1.8 in.) gap, in a headphone configuration designed and developed specifically for this application.
Process The bottom of the susceptor chamber is sprayed with a release agent and microspheric powder is added to the chamber. The chamber is heated for 120 seconds to reach 150o C (302o F) changing the powder into solid form. It is then allowed to air cool to 70o C (158o F) and removed from the chamber.
Results/Benefits Induction heating:
. reduces cycle time for increased production
. energy efficient – only heating the part allowing small production runs
. is very flexible allowing a variety of molds to be used
Heating aluminium susceptor
Related Content
Air Cooled clamp coil (half-open coil) for preheating gas pipeline
induction coating by air cooled clamp induction coil
Remove plastic coating from steel tubes by Induction Heating
Releasing Fixture by Induction Heating
U shape air cooled induction coil by UM-100C-HF for pipeline preheating
induction quenching with custom-design inductor
induction brazing diamond segment
induction brass soldering copper plate_2
Hot
induction heating bolts from turbine
induction debonding from steel rod
induction debonding rubber
Releasing Fixture by Induction Heating
Remove plastic coating from steel tubes by Induction Heating
Induction Heating catheter tipping die
Induction Molding for teflon catheter tip
induction melting for crystal growth
Newest Comment
No Comment
Post Comment