Induction Forging Inconel Billets
Views Send Enquiry
Objective To heat inconel billets to 2050°F (1121.1ºC) for a forging process.
Material Small inconel billets 0.39” OD, 0.7” length (.99mm OD, 17.8mm length) with ceramic crucible 1.0” OD, 0.7” ID, 1.4” length (25.4mm OD, 17.8mm ID, 35.6mm length); large inconel billets 0.5” OD, 1.0” length (12.7mm OD, 25.4mm length) with ceramic crucible 1.25” OD, 0.87” ID, 1.37” length (31.8mm OD, 22.1mm ID, 34.8mm length)
Temperature 2050°F (1121.1ºC)
Frequency 226 kHz
Equipment • Power of 20kW induction heating system equipped with a remote workhead.
• An induction heating coil designed and developed
specifically for this application.
Process A four-turn helical coil is used to deliver uniform heat to the inconel billets. Both size billets heat to 2050°F (1121.1ºC) within 12 seconds.
Results/Benefits Induction heating provides:
• Uniform and repeatable results
Forging Inconel Billets
induction brazing SS steel by handheld induction coil
induction melting silicon and steel
magnesium oxide acidic furnace for induction melting glass
induction preheating gas pipeline by full air cooled clamp induction coil and DSP induction heater
induction melting with Titanium alloy pot by customized induction coil
induction melting aluminium for casting wire wheel
induction heating steel plate by pancake induction coil
induction heating steel knife
MF auto feed induction forging system
MF induction heater for forging work
induction forging long steel rods by MF machine
auto feed induction forging system
customized MF induction heater for forging steel rods
induction forging steel rods with series connection induction coil
induction forging steel rods by MF induction heater
induction forging steel rods