melting stainless steel rod by uhf induction heater

500KHz/60KW

induction annealing an oval cut out on a stainless steel tube

Objective To anneal a area around an oval cutout on a stainless steel tube prior to extrusionMaterial:.75" (19mm), 1.5" (38.1mm) and 4" (101.6mm) diameter steel tubesTemperature: 1900 F ( 1038 C)Frequency: 50KHzEquipment:• UM-60AB-HF induct…

frequency induction heating equipment and quenching machine stainless steel quenching

Our UM-100AB-RF super audio induction heating equipment and quenching machine on the quenching diameter 70mm, length 600mm shaft quenching, material: 45 #, hardness depth of 2 mm, hardness 50HRC quenching produced axis has a uniform surface hardness,less o…

high frequency induction heating equipment annealed stainless steel tube

UM-60AB-HF high frequency induction heating equipment for stainless steel pipe annealing (solution), annealed steel pipe weld can withstand the stress of bending, flattening, the weld will not crack, fast heating and high efficiency

custom build stainless steel water chiller

UIHM induction heaitng machine can be cooled by tap water from customer, but if you use the water chiller, it will be better.Stainless Steel Chiller[2]

induction brazing for stainless steel

induction brazing for stainless steel_1 induction brazing for stainless steel_2

induction soldering stainless steel

Soldering stainless steel Objective Heat Stainless steel connector for soldering application in automotive wire harness manufacturingMaterial Stainless steel connector 1.57” (40mm) long, 0.6” (15mm) OD & 0.4” (10mm) thick. Lead free solderTemperatur…

induction stainless steel hot forming

Objective: To heat a stainless steel “J” tape to 3000F from room temperature at a rate of 15 feet per minute. The material is to be heated to aid in forming the “J” shape from flat stock. Material: Stainless Steel “J” Tape measuring 0.562″ wide, 0.…

induction de-bonding stainless steel

Objective To separate bonded stainless steel / carbon fiber assemblies by heating tang, softening the adhesive bond Material Stainless steel and carbon fiber inserts Temperature 300 F (149C) Frequency 200 kHz Equipment • Power of 6kW induction heating…