induction quenching head and end part of steel rod (axle)

2014/06/08

install air-cooled clamp coil for preheating pipelineair cooled clamp coil for preheating oil pipelineair-cooled clamp coil for heating oil pipeline

2014/06/06

Objective A fixture used in lens grinding uses a metallic bond to secure the glass form to the fixture during grinding. Induction is used to release the lens from the bonding materialMaterial bonded grinding fixtures; Teflon-coated helical coilTemperature

2014/05/22

Objective Recover the polypropylene insulation from hollow steel tubes to allow recycling of both the tubes and the insulation. Material Hollow steel tubes 1/8” (0.318 cm) to 5/8” (1.59 cm) IDProtective polypropylene coating Temperature 150 C (302F…

2014/05/22

Objective Heat to melting point various materials in a nitrogen atmosphere in a graphite or molybdenum crucible.Material Magnesium fluoride, tantalum pentoxide, aluminum, yttrium fluoride, germanium, hafnium or titanium dioxide and a Pyrex bell jar Tempe

2014/05/22

Objective Water-cooled brass mandrel die, nylon LDPE catheter, “K” type thermocouple and temperature controller.Material materials, supplies involved in the applicationTemperature 400F (204C)Frequency 325kHzEquipment 14KW induction heating system, remote…

2014/05/22

Objective Heat a water-cooled steel mandrel to 700F (371C) to form a high quality Teflon catheter tip.Material Teflon catheter tubing, mandrel assemblyTemperature 600-700F (315-371C)Frequency 376 kHzEquipment 6 KW induction heating system, equipped with a

2014/05/21

Objective Heat a metal braid in a plastic catheter tube to 250F (121.1C) so that another catheter tube can be bonded to it. Material 0.05” (1.27mm)diameter catheter tubes, some with a metal braid, ceramic rod Temperature 250F(121.1C) Frequency 306kHz Equi

2014/05/21

2014/01/01

induction quenching axle (shaft) by 160KW induction heater

2014/01/01