-
Keywords"n"ļ¼total 3019 records
-
induction hardening surgical knife blades
Objective Harden a 4ā³(101.6mm) section of a Stainless Steel surgical blade measuring 7ā³ (177.8mm) long. Hardness should be 48 to 53 Rockwell C on the blade after processing. Material 420 Stainless Steel Surgical Blades measuring 7ā³(177.8mm) long, 1/4ā³ā¦
Dateļ¼2007/04/03
-
induction hardening pulleys
Objective Heat cast iron pulleys to 1600F(871.1C) in order to achieve a hardness of 55 Rockwell C. Material Ductile Iron Pulleys measuring 3 1/2ā³(88.9mm) OD and 2ā³ (50.8mm) high. Temperature 1600F (871.1C) Frequency 164 kHz Equipment ā¢ Power of 10 kā¦
Dateļ¼2007/04/03
-
induction case hardening shaft
Case hardening shafts Objective Harden the gear end of an armature shaft to 58-65 Rockwell C at a depth of 0.02ā³(.51mm) on the center line of the teeth and to 49-55 Rockwell C at a depth of .010ā³ (.3mm) on the center line of the root. Material Steā¦
Dateļ¼2007/04/03
-
induction hardening steel cam
Objective To harden the perimeter of ā thick steel cam assemblies Material ā thick steel cam assemblies of varying geometries Temperature 1650 F (900 C) Frequency 177 kHz Equipment Power of 20 kW, induction heating system, equipped with a remote heatā¦
Dateļ¼2007/04/03
-
induction hardening steel
Objective To harden various size ends of hand held marking stamps. The area to be hardened is 3/4ā (19mm) up the shank. Material Steel stamps 1/4ā (6.3mm), 3/8ā (9.5mm), 1/2ā (12.7mm) and 5/8ā (15.8mm) square Temperature 1550 F (843 C) Frequency 99ā¦
Dateļ¼2007/04/03
-
induction hardening steel screw threads or steel nails
ObjectiveHeat steel roofing screw to 1650 F to harden the threadsMaterial Steel roofing screws of varying diameters less than 1.25ā (31.75mm) diameter, 5ā (127mm) longTemperature:1650 F (899 C)Frequency:291 kHzEquipment ā¢ Power of 6 kW induction heatingā¦
Dateļ¼2007/04/03
-
cap sealing with induction heating
Objective An induction heater is used to heat a polymer laminated aluminum foil in 0.5 to 2.0 seconds. The heat produced in the aluminum foil melts the polymer that bonds to the neck of a plastic container.Material Aluminum foil, polyethylene, polypropylenā¦
Dateļ¼2007/04/03
-
induction sealing shampoo container
Objective To heat an aluminum foil inside a plastic shampoo cap for sealingMaterial 2.0ā diameter, plastic flip top cap, with a 0.9ā diameter aluminum foil sealTemperature 250 ā 300 F (120 ā 150 C)Frequency 225 kHzEquipment Power of 10 kW, induction heā¦
Dateļ¼2007/04/03
-
induction cap seal container
Objective To heat an aluminum in-cap laminate to a temperature of 350F in order to seal the laminate to the container Material 3.5ā (100mm) Temperature 350 F (177C) Frequency 300 kHz Equipment Power of 4.5kW induction heating system; custom-designed wā¦
Dateļ¼2007/04/03
-
induction sealing aluminum foil to plastic bottle
Objective To seal a 1.5ā (38.1mm) diameter cap with foil to a plastic bottle.Material 1.5ā (38.1mm) diameter cap with 1.5ā (38.1mm) diameter aluminum seal, plastic bottleTemperature 250-300 F (121-149 C)Frequency 309 kHzEquipment ā¢Power of 6kW inductioā¦
Dateļ¼2007/04/03
© Copyright 2021. uihm.com All Rights Reserved.