Heat Treating Forgings
Views Send Enquiry
Forgings are subjected to final heat treatment or intermediate heat treatment to improve the maohinabitity.
The processes that occur during heat treatment of forgings can be divided into two groups — processesoccurring at temperatures above and below Ac 3.
The temperatures of these processes are given below:
Forgings are heat treated in continuous furnaces with complete mechanization of the heat treatment cycle and automatic control.
Apparatus for Heat Treating Forged Turbine Blades.
The apparatus consists of two pusher electric furnaces of the Eichelin type (Fig. 1) [1].
The furnace dimensions are 1600 ? 400 x 6000mm.
The frame of the furnace is welded. It is gastight,
which makes it possible to use a protective atmosphere. The metal is heated either to 600 or 950~
The furnace is heated by means of radiant tubes mounted on the side walls and in the hearth.
The furnace is divided into six independently controlled zones. The power to each zone is graduated
- – 50 kW in the first stage, 35 kW in the second stage, 22.5 kW in the third stage, and 17.5 kW in the
fourth stage.
The following production cycles are possible (Fig. 1):
a) The forgings, passing through the furnace, are either transported to another section (positions 7,8, 1, 2, 3, 4) or are transferred to a washer, after which they arrive at the loading station (positions7,8,1, 2, 3, 5, 7);
b) in furnace 1 the forgings are heated to quenching temperature and in furnace 9 to tempering temperature(positions 7, 8, 1, 2, 3, 5, 9);
c) in fully loaded furnaces the treatment occurs in the same manner as in batch furnaces.
The forgings are placed on trays of a heat resistant alloy (37% Ni, 17% Cr). The loading-unloading time varies from 10 to 60 rain.
The apparatus is intended for heat treating a wide variety of steels; the maximum throughput is 600kg/h, which requires two workers.
Related Content
induction brazing SS steel by handheld induction coil
induction melting silicon and steel
magnesium oxide acidic furnace for induction melting glass
induction preheating gas pipeline by full air cooled clamp induction coil and DSP induction heater
induction melting with Titanium alloy pot by customized induction coil
induction melting aluminium for casting wire wheel
induction heating steel plate by pancake induction coil
induction heating steel knife
Hot
MF auto feed induction forging system
MF induction heater for forging work
induction forging long steel rods by MF machine
auto feed induction forging system
customized MF induction heater for forging steel rods
induction forging steel rods with series connection induction coil
induction forging steel rods by MF induction heater
induction forging steel rods
Newest Comment
No Comment
Post Comment