Induction Brazing thin walled tube
Views Send Enquiry
Objective Braze a NI-SPAN-C alloy tube to a steel cap in a hydrogen atmosphere
Material NI-SPAN-C alloy tube (5mm) dia, steel cap (7mm) dia, (7mm) long, nickel braze, quartz tube and hydrogen
Temperature 1875 ºF (1024 ºC)
Frequency 313 kHz
Equipment • Power of 20kW induction heating system, equipped with a remote workhead containing two 1.5μF capacitors for a total of 0.75μF
• An induction heating coil designed and developed specifically for this application.
Process A single turn helical coil is used to heat the tube assembly directly. The tube assembly is held in place inside the quartz tube by a copper fixture and hydrogen is fed into the quartz tube. Braze preforms are placed at the braze area and heat is applied for 60 seconds to flow the braze.
Results/Benefits Induction heating provides:
• Rapid localized heat to joint area only
• Minimized oxidation reduces cleaning time
• Improved part quality
• Hands-free heating that involves no operator skill for manufacturing
brazing-thin-walled-tube
Related Content
induction brazing SS steel by handheld induction coil
induction melting silicon and steel
magnesium oxide acidic furnace for induction melting glass
induction preheating gas pipeline by full air cooled clamp induction coil and DSP induction heater
induction melting with Titanium alloy pot by customized induction coil
induction melting aluminium for casting wire wheel
induction heating steel plate by pancake induction coil
induction heating steel knife
Hot
induction brazing SS steel by handheld induction coil
induction brazing shoe mold
induction brazing drill bit of transformer
customized RF induction heater for brazing works
induction brazing stator
water cooled flexible handheld induction coil for heating SS steel pipe
water cooled flexible handheld induction coil for heating SS steel pipes
UHF handheld induction heater for brazing copper
Newest Comment
No Comment
Post Comment