Intro: Objective To heat an aluminum molding shape in order to activate an adhesive coating prior to applying the vinylMaterial Aluminum molding folded from a flat sheet measuring 2″ wide and 0.03″ thick. The final form measures 5/8″ by 1″Temperature 500FFreq…

Intro: Objective To braze a steel tube to a steel “T” fittingMaterial 1” (25.4mm) diameter steel tubing, steel fitting, braze slug and black fluxTemperature 1400F (760C)Frequency 198 kHzEquipment • UM-UHF-15kW induction heating system, equipped with remote …

Intro: Objective To heat a steel dental assembly to 1400F (760C) for brazingMaterial Stainless steel plates 0.118” (3mm) square and 0.078” (2mm) high, stainless steel hook, mesh, two pieces of graphite 0.375”(9.5mm) square cross section, 4” (101.6mm) long and…

Intro: Objective Heat aluminum for an automotive brazing applicationMaterial Aluminum tubing 0.50 (12.7mm) dia, an aluminum boss 1”(25.4mm) long, flux filled braze ringsTemperature 1200 F (649 C)Frequency 270 kHzEquipment •UM-UHF-10kW induction heating system, …

Intro: Objective Heating steel golf ball mold to brazing dimple insertMaterial Golf ball mold 2” in diameter, braze flux paste, dimple insertTemperature 1400 F (760 C)Frequency 206 kHzEquipment • UM-UHF-20 kW induction heating system, equipped with a remote wor…

Intro: Objective Brazing a joint between a copper lug and nickel plated copper pins on a pressurized heater connector.Material 1.5” (38.1mm) dia heater connector in a ceramic insulator with L shaped copper lugs and nickel plated copper pins, silver solder and br

Intro: Objective Braze an end plug on a stainless steel joint of the car grill before powder coating applicationMaterial Stainless steel car grill 0.5” x 0.19” (12.7mm x 4.8mm), end plugs and braze ringTemperature 1350 F (732C)Frequency 267 kHzEquipment • UM-U…

Intro: Objective Braze a stainless steel braided hose to copper elbows for a braided hose assembly.Material Stainless steel braided hose 3/8” (9.5mm) OD, copper elbow 1/4” (6.3mm) OD, braze preform rings and black fluxTemperature 1400 F (760 C)Frequency 267 kHz…

Intro: Objective Heat silver contacts and brass/copper bus for brazing applicationMaterial Silver contact .75 (19mm) diameter, brass and copper bus 2” x 1” (50.8 x 25.4mm), braze shims, white fluxTemperature 1300 F (704 C)Frequency 320 kHzEquipment • UM-UHF-10…

Intro: Objective Braze a carbide tip to a 4140 steel cutting toolMaterial Carbide Isograde C2 & C5 tips, 4140 circular steel cutter, flux and silver braze shimTemperature 1400 F (760 C)Frequency 290 kHzEquipment • UM-UHF-20kW induction heating system, equipp