-
Keywords"Steel"ļ¼total 554 records
-
induction heating eight Steel rods
Heating Eight Steel Rods Objective Heat eight steel rods simultaneously to 212F (100C) for a molding operation.Material 8 Steel Rods measuring 1/2 (12.7mm) in diameter and 14 (355.6mm) long held in place by 2.5ā (63.5mm) diameter Teflon end plates.Temperaā¦
Dateļ¼2008/08/03
-
induction heat treatment of Steels
Heat Treating is the process of heating and cooling a steel to obtain desired properties.Various types of heat treatment processes are used to change the following properties or conditionsof the steel:- Improve the toughness ā Improve the machinability- Iā¦
Dateļ¼2008/02/03
-
induction heating Steel mandrel tip
Heating steel mandrel tip Objective Heat a water-cooled steel mandrel to 700F (371C) to form a high quality Teflon catheter tip.Material Teflon catheter tubing, mandrel assemblyTemperature 600-700F (315-371C)Frequency 376 kHzEquipment ā¢ Power of 10kW induā¦
Dateļ¼2008/02/03
-
induction soldering stainless Steel
Soldering stainless steel Objective Heat Stainless steel connector for soldering application in automotive wire harness manufacturingMaterial Stainless steel connector 1.57ā (40mm) long, 0.6ā (15mm) OD & 0.4ā (10mm) thick. Lead free solderTemperaturā¦
Dateļ¼2008/02/03
-
induction soldering Steel
Soldering Steel Objective To heat a special steel housing to 500(260) F(C) for a soldering applicationMaterial Steel housingSolder wire and fluxTemperature 500(260) 550(287.8) F(C)Frequency 200 kHzEquipment Power of 6kW, 150-400 kHz solid state induction ā¦
Dateļ¼2008/02/03
-
induction soldering Steel tube
Soldering Steel Tube Objective Heat a.125ā (3.175mm) diameter stainless steel tube to a 1ā diameter cylinder 1ā (25.4mm) tall for a soldering applicationMaterial Stainless steel cylinder and tubeTemperature indicating paint Lead free solder preform ringā¦
Dateļ¼2008/02/03
-
induction shrink fit Steel gear
Shrink fit steel gear Objective Heat the bore of a hardened spur steel gear to shrink fit onto a gear motor shaft. This is part of a chair for the disabled.Material Steel gear 2.5 h (63.5mm) OD, .75 h (19mm) ID x .625 h (16mm) thick, temperature indicatingā¦
Dateļ¼2008/02/03
-
induction soldering Steel connectors
Soldering Steel Connectors Objective Heat an assembly of small, gold-plated steel connectors to a brass block. Material Approx. 1/8ā (3.2mm) diameter gold-plated steel connectors, 1ā(25.4mm) square x 1/4ā thick brass block Temperature 600F(315.6C)ā¦
Dateļ¼2008/02/03
-
induction heating Steel dogbone specimen
Heating Steel Dogbone Specimen Objective: To heat a magnetic steel dogbone specimen to 12000F as quickly as possible and sustained for tensile testing. Heating should take place using a helical coil placed square in relation to the long axis of the gage arā¦
Dateļ¼2008/02/03
-
induction heating repair lined Steel tank
Heating Repair Lined Steel Tank Objective: To heat selected areas of a glass lined steel tank to 16000F in order to perform repairs of cracks and chips. The glass is used as a frit which must be reflowed and filled into the damaged areas. Temperature contrā¦
Dateļ¼2008/02/03
© Copyright 2021. uihm.com All Rights Reserved.