• Induction Soldering Steel Type:
    Class: Induction Soldering

    Intro: Soldering Steel Objective To heat a special steel housing to 500(260) F(C) for a soldering applicationMaterial Steel housingSolder wire and fluxTemperature 500(260) 550(287.8) F(C)Frequency 200 kHzEquipment Power of 6kW, 150-400 kHz solid state induc…

  • Induction Soldering Steel Tube Type:
    Class: Induction Soldering

    Intro: Soldering Steel Tube Objective Heat a.125” (3.175mm) diameter stainless steel tube to a 1” diameter cylinder 1” (25.4mm) tall for a soldering applicationMaterial Stainless steel cylinder and tubeTemperature indicating paint Lead free solder preform…

  • Induction Soldering copper Type:
    Class: Induction Soldering

    Intro: Soldering copperObjective Heat copper tab until the solder reflows.Material Copper tab 0.25 X 0.25 inch square about 0.05 inches thick.Lead free solder material (higher melting temperature than regular solder.)Temperature 500 F for 1.25 secondsFrequen…

  • Induction Soldering Steel Connectors Type:
    Class: Induction Soldering

    Intro: Soldering Steel ConnectorsObjective Heat an assembly of small, gold-plated steel connectors to a brass block.Material Approx. 1/8” (3.2mm) diameter gold-plated steel connectors, 1”(25.4mm) square x 1/4” thick brass blockTemperature 600F(315.6C)Freq…

  • Induction Soldering Radio Antenna Type:
    Class: Induction Soldering

    Intro: Soldering Radio AntennaObjective To heat a coaxial antenna assembly to 600F within 2 seconds for a soldering application. The goal to improve on an existing procedure with a soldering iron which required 10 to 15 seconds.Material .250” diameter alumi…

  • Induction Tin Soldering Type:
    Class: Induction Soldering

    Intro: Induction Tin Soldering

«Prev1234Next»
Press←or→to turn page