induction melting steel by 40kw power supply with graphite crucible

induction melting steel by 40KW power supply with graphite crucibleinduction melting steel by 40KW power supply

induction melting steel by custom-design 120kw induction heater

induction melting steel by custom-design 120KW induction heater

install air-cooled clamp coil for preheating pipeline

install air-cooled clamp coil for preheating pipelineair cooled clamp coil for preheating oil pipelineair-cooled clamp coil for heating oil pipeline

releasing fixture by induction heating

Objective A fixture used in lens grinding uses a metallic bond to secure the glass form to the fixture during grinding. Induction is used to release the lens from the bonding materialMaterial bonded grinding fixtures; Teflon-coated helical coilTemperature …

induction melting titanium and nobelium

Objective: Crucible melting of Titanium and Nobelium ingots within a period of 45 seconds.Four ingots of Nobelium are to be placed in a crucible (ID#6012) and heated, while a single ingot of Titanium is placed in a crucible (ID#65045) for heating. Materia…

remove plastic coating from steel tubes by induction heating

Objective Recover the polypropylene insulation from hollow steel tubes to allow recycling of both the tubes and the insulation. Material Hollow steel tubes 1/8” (0.318 cm) to 5/8” (1.59 cm) IDProtective polypropylene coating Temperature 150 C (302F…

crucible melting various materials in nitrogen atmosphere

Objective Heat to melting point various materials in a nitrogen atmosphere in a graphite or molybdenum crucible.Material Magnesium fluoride, tantalum pentoxide, aluminum, yttrium fluoride, germanium, hafnium or titanium dioxide and a Pyrex bell jar Temper…

induction heating catheter tipping die

Objective Water-cooled brass mandrel die, nylon LDPE catheter, “K” type thermocouple and temperature controller.Material materials, supplies involved in the applicationTemperature 400F (204C)Frequency 325kHzEquipment 14KW induction heating system, remote…

induction heating for plastic reflow with catheter tubing

Objective Heat a metal braid in a plastic catheter tube to 250F (121.1C) so that another catheter tube can be bonded to it. Material 0.05” (1.27mm)diameter catheter tubes, some with a metal braid, ceramic rod Temperature 250F(121.1C) Frequency 306kHz Equi…

custom-design clamp coil for preheating or after heating pipeline

custom-design clamp coil for preheating or after heating pipelineThese clamp coils can match with UM-DSP80AB-HF,UM-DSP80A-HF,UM-DSP100AB-HF,UM-DSP100A-HF, etc.,custom-design clamp coil for preheating or after heating pipeline