Objective Anneal saw blades used for cutting bread, prior to hole punching.Material .38” (9.6mm) wide and .51” (12.9mm) wide continuous strips of 400 series stainless steel.Temperature 600C (315.6F) for one secondFrequency 229kHzEquipment • UM 6 kW …

2006/10/02

Objective To heat customer-supplied rods of various diameters (0.14 inch to 0.49 inch) to 4170F (2300C) at 2-4 feet per minuteMaterial Tungsten and Molybdenum; Tests are run in an atmosphere of Nitrogen or Hydrogen avoid oxidation of the materials.Tempera

2006/10/02

Objective Heating a titanium fastener to 1100-1450F (593-788C) for an annealing process.Material 0.06” (1.5mm) high zone on a titanium fastener measuring 0.163-0.375” (4.14-9.52mm) in diameter and 0.5-3.0” (12.7-76.2mm) in lengthTemperature 1100-1450F (…

2006/10/02

Objective: Anneal a brazing wire for preform production.Material :Copper Nickel Silver 2774 Alloy rod 0.070″ (1.8mm) diameter.Temperature 650F(343.3C)Frequency 281 kHzEquipment • UM-06A-UHF induction heating system equipped with a remote workhead with on…

2006/10/02

Objective:To selectively and uniformly anneal two sections of a thread ring gage block from the hole to the outside surface from a hardness of Rc 59-61 to Rc 45. The gage blocks are made from O6 steel and range in size from 1″ to 8 1/2″ in diameter and r…

2006/10/02

Induction Bending And Hot Rolling the 1620mmX40mm steel pipe in the West-East natural gas transmission project.Induction bending is also referred to as hot rolling, but there are some differences between the two processes. Induction bending is an efficien

2006/03/30

Induction quenching is the process of quenching steel by heating it. It is done by an alternating magnetic field to a temperature above or within a specific transformation range. It is straight away followed by quenching. This procedure of quenching can b

2006/03/30

heat-treatment1Heat Treatment is generally referred to as heating and cooling of different metals in a controlled way in order to amend both of its mechanical and physical properties without altering the shape of the product. The process involves the mate

2006/03/30

There are different types of heat treatment procedures offered by various companies in the market. Few of them are widely applied and are extremely effective. One of the efficient heat treatment procedures is annealing. This process supports an entire ind

2006/03/30

Raising the temperature of the items break down the complexity of the matter and simplifies the tedious process. Heating melts the hard structure of the substances and minutest of the details can be analyzed.There are many alluring shapes of hard metals.

2006/03/30