induction bonding plastic sleeve to stainless steel handle

Objective Heating end of a stainless steel handle with a plastic sleeve coated with heat adhesive for a bonding applicationMaterial 1” (25mm) OD stainless steel handle 0.30” (7.6) thick covered with a plastic sleeve that is coated with a heat adhesive be…

induction debond rubber seal from steel

Objective Debond a fluorocarbon rubber seal from a carbon steel oil seal Material 4” (10.2cm) OD carbon steel oil seal with a fluorocarbon rubber seal Temperature 1200 F (649 C) Frequency 179 kHz Equipment • Power of 6kW induction heating system, equi…

induction bonding gasket to nut

Objective To heat a steel sombrero nut prior to gasket bonding Material • Steel sombrero-shaped nut approx. 2” (50.8mm) diameter, 2” (50.8mm) in height • gasket Temperature 350 F (176 C) Frequency 266 kHz Equipment • Power of 6kW induction heating…

induction brazing thin walled tube

Objective Braze a NI-SPAN-C alloy tube to a steel cap in a hydrogen atmosphere Material NI-SPAN-C alloy tube (5mm) dia, steel cap (7mm) dia, (7mm) long, nickel braze, quartz tube and hydrogen Temperature 1875 F (1024 C) Frequency 313 kHz Equipment • P…

induction brazing piston valve

Objective Brazing a steel piston valve assembly Material Steel piston valve 4.5” dia (11.43cm), tungsten carbide plate and braze Temperature 1350 F Frequency 91 kHz Equipment • Power of 90kW induction heating system, equipped with a remote workhead c…

induction brazing brass faucet

Objective Brazing two joints on a brass bathroom faucet assembly Material Brass bathroom fittings 1” OD, brazing rings, flux Temperature 1148 F (620 C) Frequency 90 kHz Equipment • Power of 90kW induction heating system, equipped with a remote workhe…

induction brazing manufacture needles

Objective Brazing stainless steel housings to stainless steel tube for gas assembly used in the manufacturing of needles Material 2 stainless steel housings .25” (6.35mm) dia, .675 (17.1mm) & .54” (13.7mm) in length, stainless steel tube .031” (.78…

induction brazing copper pivot

Objective Brazing a copper pivot assembly Material Two copper uprights 2” (5cm) wide x 4” (10.2cm) high, copper base 3” (7.6cm) x 2” (5cm) and .5” (1.3mm) thick with 2 channels for the uprights to the slide into, braze shims and black flux Temperatu…

induction brazing heat-sensing probe

Objective To heat a coil and a wire assembly to 1300F (704C) within 60 seconds for brazing. Material Platinum coil, steel wire, braze paste Temperature 1300F (704C) Frequency 307kHz Equipment Power of 6KW output, remote heat station containing one 1.2 …

induction brazing dental tools

Objective To heat a steel tip and shank assembly to 1300F (704C) within 3 seconds for brazing with induction heating instead of torch brazing. Material 0.1” (2.54mm) diameter steel tip & shank, 0.07” (1.78mm) diameter braze ring Temperature 1300F (…